Lift Top Coffee Table with Drawers

diy lift top coffee table with storage drawers
Difficulty
Advanced
| Print this plan

The mission was to create a pop-up (lift top) coffee table that had dual tops so that when my significant other and I are sitting on the couch, one of us could have their side up and the other one could leave theirs down. I'm going to upload the drawings and step by step instructions shortly!

lift top coffee table plans
lift top coffee table plans
lift top coffee table plans
lift top coffee table plans

It all started when my significant other and I decided that we wanted to get the ugly TV trays out of our living room. We're always eating in front of the TV (don't judge!), and it was a cluttered mess in there that we had to hustle to clean up whenever we had guests over. We had an ikea coffee table that was taking up entirely too much space, and didn't really function for what we needed, so it was off to the drawing board!  A friend of ours had one of these pop-up/lift top coffee tables, and we fell in love with the idea. Of course, you can just buy one of these and be done with it, but why do it the easy way? Not to mention that none of them that I found suited my needs for size, drawers, and not costing a thousand dollars. Besides... I love a project!

So it was off to the races. I drew up these plans with Solidworks. I've used autocad for my entire career, but that was mostly for 2-d; this one I wanted to draw up in 3-d. It was worth every minute I spent drawing. In fact, I should have spent a little more time thinking about the tops and how they go together, but that's a story for another paragraph.

The lift top mechanisms were the hardest thing to come by. You can find them on amazon, but they're ridiculously expensive. I actually found a guy selling the size I wanted on ebay and paid him $40/per (with free shipping). I believe you can find the exact ones I got on alibaba. Here's the description for the ones I bought "Spring Assist Pop Up Coffee Table Mechanism,  Full Set, Solid Steel, Carries 110-220lbs, 16.6"(closed) width, 22" length, 3.5" tall (closed), Lifts Upward 10.5", Moves Forward 12.6", Recommended Table Top Weight of 22-44lbs for Optimal Performance, Product Dimensions 22" x 16.6" x 3.5" "They're actually about 3/16" taller than 3.5", but the rest of the dimensions were pretty accurate. I had to cut some metal off with a grinder to fit into my project, but that was fairly simple. 

As I said before, the tops were the most intensive part. I made them from three pieces of wood (2 1x12's and a 1x4). I used a router to rabbet them together, along with wood glue. I made a complete mess of the whole thing, and basically ended up making them about 5/8" too short. You can't really tell unless you're up close, but I'll always know. Anyway, without a jointer or a planer, it's hard to get the boards to fit together perfectly. It's going to take patience and a lot -  and I mean a lot-  of sandpaper. 

Oh, and I used oak. Oak is heavy and great for this kind of furniture that is going to see a lot of wear and tear, but man is it expensive! You can use some other hardwood, or buy un-surfaced boards from a lumber yard and surface them yourself to save money. That means you'll need a jointer and a planer, and since I don't have those, I bought my s4s (surfaced 4 sides) boards from Lowes. The interior parts (drawer sides/backs, support pieces, etc.) are made of pine; they don't show, so it really doesn't matter much. 

Let's get started!

 

Dimensions
lift top coffee table plans
Approximately 47.5" x 26" x 16"

Preparation

Shopping List

Clamps! SO MANY CLAMPS!

Wood glue

Number of boards Size (nominal)

Oak (nice wood for show pieces):

  • 1 1x4x6 
  • 3 1x4x8
  • 2 1x8x8
  • 3 2x2x3
  • 2 1x12x6

Pine/poplar (whatever is cheap):

  • 2 1x2x8
  • 1 1x4x6
  • 2 1x6x8
  • 1 2x2x8

Also needed:

  • Half sheet of 1/2" plywood
  • Whole Sheet of 1/8" plywood (drawer bottoms)
  • 10" drawer slides (found on Amazon)
  • Drawer hardware
Common Materials
3/4 inch screws
paint brush
Cut List

Table Frame:

  • 4 x Side trim 0.75" x 3.5" x 22.5"
  • 2 x Sides 0.75" x 7.25" x22.5"
  • 4 x Legs 1.5" x 1.5" x 15.25"
  • 2 x Front/Back Vertical 1.5" x 1.5" x 7.25"
  • 4 x Front/Back Horiz. 0.75" x 3.5" x 45.5"
  • Drawer Mid. Supports 0.75" x 1.5" x 24"
  • Drawer Side Supports 0.75" x 1.5" x 22.5"
  • Interior Support Long 1.5" x 1.5" x 9.8125"
  • Interior support Short 1.5" x1.5" x 3.75"
  • Interior Cross Support 0.75" x 3.5" x 24"

Drawers:

  • 4 x Drawer Face 0.75" x 7.25" x 22" (you might cut about 1/8" off all sides of the drawer face to fit flush in the frame instead of outside like mine)
  • 8 x Drawer Side 0.75" x 5.5" x 10.75"
  • 4 x Drawer Back 0.75" x 5.5" x 18.25"
  • 4 x Drawer Bottom 0.125" x 10.75" x 19.75"

Tops:

  • 4 x Front and Back 0.75" x 11.25" x 24.5"
  • 2 x Middle 0.75" x 3.5" x 24.5"
Tools
Tape Measure
Speed Square
Pencil
Hammer
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Circular Saw
Table Saw
Brad Nailer
Power Sander
Level
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

Make all the cuts. I put the actual dimensions of the boards. For the complete novice, don't forget that when I say 0.75, I mean 3/4", and if a cut has a dimension of 0.75x3.5x22.5, that means you'll be cutting a 22.5" from a 1"x4" board. If you bought your lumber from L0wes or H0meDep0t, a 1"x4"x8' board will actually be 3/4" x 3.5" x 8' because of how much they plane off to make the sides smooth.

My advice to you is to keep the tops, drawers, and frame parts separate. It's going to be a big pile of wood, and you don't want to put a pocket hole where it doesn't belong!

Step 2

At this point, I decided to put together the tops. If you bought some really straight oak boards, you'll probably be looking at a pretty good fit together. If you bought some not so straight boards, you may end up having to take a bit off with a jointer (or a router, like I did). Otherwise, you'll get gaps, and that'll look weird.

Get your 1" x 12" tops, and the 1" x 4" middles, and pick the best matches. Look at the grain and color of the wood and just take your best guess. If you're going to use pocket holes to join them, you'll want them on both sides. You'll also need to use wood glue and some pretty large clamps to hold them together for you. It's a process. If you don't want to use pocket holes, you can make a much stronger joint by rabbeting the interior edges with a router. Watch a lot of youtube videos before you try it for your first time, and definitely practice on some scraps!! This is where I ended up having to take too much off, and it left my tops a little short.

Step 3

Drawers!
These should be pretty simple. You'll use pocket holes to put together the sides and backs. I used a brad nailer to attach the 1/8" plywood bottoms. I didn't attach the faces at this point because I wanted to stain/finish them first. You can attach them now and stain/poly after the fact if you want. I saved the drawer hardware for the very, very end of the project. The drawer slides should wait until you've got the frame assembled to help you figure out where to mount them.

Step 4

Pocket holes! Pocket holes EVERYWHERE!

Get out your kreg jig, and start making pocket holes. You'll need them on the 1x4x45.5's in three spots (sides and the middle where the verticals mount), all of the side pieces, and the really short oak middle pieces. You'll also need them on the interior supports. Since the vast majority of your connections are 3/4" to 3/4" wood, you'll need mostly only 1-1/4" pocket hole screws, and you won't need to reset your kreg jig for much of anything.

Step 5

Assembly
Time to put together the sides. You should have already put pocket holes in the backs of the 1x4's and the 1x8's, so get your clamps out. I suggest getting one leg, start with one of the 1x4's, make it flush to the top of the leg, glue the edge, and then screw it on. Then get the 1x8, glue the edge (top and leg side), then clamp it flush to the leg and the 1x4, then screw it in. Next, grab the second 1x4, glue the top and side edge, clamp to the already installed parts, and screw it in. Wipe the excess glue away fast!! It'll harden and then turn into a gross mess otherwise. Finally, glue the opposite edges of the 1x4's and 1x8, and clamp the other leg in place. Carefullly line it up, clamp it together, and make it flush. Screw it together, and you've got a side (pictured above).

Step 6

Now that you've got the sides, it's time to mount those long pieces in the front. Mount the top 1x4x45.5 piece flush to the top of the legs. Use wood glue and at least two pocket holes to attach them. Measure carefully down or use the front/back verticals (1.5x1.5x7.25) to figure out exactly where to mount the bottom 1x4x45.5. You'll start seeing the shape of the coffee table come together now!

Step 7

Interior support structure...
You'll need to mount those front/back verticals with pocket holes. Measure VERY CAREFULLY to find the exact middle of your 1x4x45's horizontals, and that'll tell you where to mount them. I actually drilled the pocket holes in the 1x4x45.5's exactly in the middle back in step 2. If you've gotten all of the pocket holes drilled for the supports, this will go pretty quickly. You'll notice that I've left space for the lift hardware. This is important, or the tops won't sit flush. The picture doesn't show all of the supports. You'll need left and right side supports to hold the lift mechanism. I think it should be fairly obvious about where they mount, and they're in the cut list. Just make sure they're about 3/16" low to account for the thickness of the metal on the lift mechanism.

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. Sand it all again with 220 grit sand paper!

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

Comments

Dave M

Fri, 04/10/2015 - 05:53

I'll get the plans up shortly. It's taking me a while to make the individual cut lists and such. Sorry about that.