Corner TV Stand

Submitted by mtr146 on Mon, 09/16/2013 - 12:57

edited the plans a little bit because the original plans were too tall. my cabinet is only 36 inches high. I did the inlet doors but if I had to do it over again i would ABSOLUTELY do overlay doors to cover up any imperfections in the opening. this project is a little bulky to move around and therefore get the shelves level, at least it was for me.

Also, I cut the back two inch strips to fit more snuggly. I ripped one piece at a 45 so it fit more flush against the other 1X2 on the back. This cut around the back of the shelves better in my opinion but isn't necessary.

I chose to do a similar paint treatment. i sprayed on a nice dark grey with my wagner 590 sprayer and then did a white wash with a big 4inch brush and just brushing on liberally (and mostly dry)

GREAT Project and fits the space very well. THANK YOU!

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
BEHR Dark Ask with a white wash of just 50/50 water and white satin paint I had laying around. I sprayed the Dark ASH on everywhere, but then did the white wash on the outside portion (not the inside shelves)
Recommended Skill Level
Intermediate