Study/ Work Bench

Submitted by Alisa on Sun, 10/06/2013 - 22:34

This is my first woodworking project and when I saw the plans, I knew it would be perfect for an indoor study and work bench for my hubby. Not having any power tools except for a drill and two sanders, I went to Home Depot and they were obliging and patient enough to cut my lumber for me (I loved making the bench so tools will be next on my list). The plans were easy to understand and since Maths is not my strong point, I was happy to have something so easy and methodical to work with. I loved the extra shelf on the top and the larger one on the bottom.

I made 2 modifications:

The height of the front legs are 33” instead of 36” because I wanted it at wrist height for my husband on the current stool he has in his room. I kept the back legs at 48”. I forgot to account for the 3” difference when I was assembling the lower shelf, so I ended up taking a hacksaw to the base of the 4 legs after assembly to account for this and this explains why the bottom shelf is so low to the ground. But it works!

Hubby wanted something attached to the back of the bench to protect the wall behind from spills. He also wanted a smooth shelf surface where nothing could get stuck in small spaces. The shelves also needed to be able to take weight and being a newbie, I didn’t want to mess with the measurements too much. After assembling the bench (including the back supports), I purchased a large 3/8” sheet of plywood and had it cut into 4 pieces – two for the back spaces and two for the shelves and then used screws and glue to attach those to the piece. The one thing I should’ve done was purchased 1 ¼” screws for attaching the plywood to the shelves, because I overlooked it and they went straight through to the underside of the shelves and had to have someone cut the screw ends off, which was no small feat.

But overall, I was very pleased with the way it turned out, especially for a first-time project.

Built from Plan(s)
Estimated Cost
$85
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
For the finish, I used 2 coats of Minwax Wood Stain in Dark Walnut. It was darker than I’d expected and even though I’d used wood conditioner and sanded it beforehand, the plywood took on a zebra-like appearance after I wiped the first coat off with a rag. So I decided to make it more uniform and painted the second coat on, concentrating on the lighter areas and letting it dry without wiping it off (not a good idea because I had to wait a week to ensure it evaporated prior to applying the topcoat). I then applied 3 coats of the water-based Polycrylic protective coat, according to the directions on packaging.
Recommended Skill Level
Beginner