Mirror Frame

Submitted by AndyH on Tue, 03/04/2014 - 11:00

We had a big ugly frameless mirror in one of restrooms that builder had fitted as standard. Took it down and made this framed mirror instead.

Made from 4 by 1 with routed recess for mirror. Edges are 3 by 1s

Finished in Rustoleum Driftwood and two coats of Minwax Satin WIpe On Poly.

It is quite heavy so I fitted it to the wall with a French cleat made from two scraps of wood which also means it fits flush to the wall.

Estimated Cost
$40
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Rustoleum Driftwood and Minwax Wipe On Satin Poly
Recommended Skill Level
Starter Project