Free Standing Closet

Submitted by Anonymous (not verified) on Sun, 03/28/2021 - 09:13

thank you so much for these plans! We cut the original design in half, so it would fit the space- we used pine so the boards were a little warped but eventually everything screwed down into place and now it really does free stand and its all level! We may add a crossbeam at the back for extra stability. Stained with Ipswitch Pine by Verathane , 2 layers with sanding between, basic piping from the hardware store. Well under $200 total!

5.5 feet tall, 6 feet wide, 2 feet deep

Thanks again, your plans were thorough and easy to follow.

Built from Plan(s)
Estimated Cost
200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Laquer - semi gloss
2 coats, sand in between
Recommended Skill Level
Beginner

Comments