Mother's Day First Build - "Cameron" Vintage Storage Dining Table

Submitted by meggrs on Sun, 05/20/2012 - 17:04

This wasn't my first DIY project but it was my build from this side and first real woodworking project and it's been the most satisfying to date. I made this table for Mother's Day for my mom who has been dreaming of the PB Cameron fixed trestle dining table but couldn't take the hefty price tag. Things I changed: - I added the "pegs" on the table ends to make it look more like the PB version. They are just 1/2" round wood plugs glued to the trestles. - I was going to add two more tabletop braces underneath (again to make it more like the PB version) but I cut one of them incorrectly so I just added on more in the middle. I'm turning the boo-boo lumber into a yarn swift; waste not. Things I learned: - If the wood is going to be stained and varnished, shell out for the *good* stuff. I had to put on way to many coats of polyurethane to make the cheapo pine boards smooth enough even after I had dampened it to raise the grain and sanded it. - Don't believe the stated length of the boards you buy. 36-inch boards are actually 36 inches and a bit. I ended up having to disassemble and re-cut my tabletop supports. - Practice with your jigsaw if you haven't made curved cuts before to see how tightly you can turn. Luckily I had extra ply to make another couple trestles after I botched the first two...

Built from Plan(s)
Estimated Cost
$160 for materials
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Table base:
- Stained edges with Minwax Dark Walnut.
- Two coats Annie Sloan chalk paint in Old White.
- One coat Annie Sloan clear soft wax.
- Distressed edges with sandpaper to show stain underneath.
- One final coat Annie Sloan clear soft wax and a good buffing.

Tabletop:
- One coat Varathane wood conditioner. (Pine takes stain unevenly without it.)
- Three coats Minwax Dark Walnut.
- 18-million coats Minwax Semigloss Polyurethane. (It seemed like it anyway.)
Recommended Skill Level
Intermediate

Comments

tracysmith

Sun, 05/20/2012 - 21:33

I've had to learn some of those things myself since I started building a year and a half ago. Sometimes it's frustrating and even costly, but when you learn it, you learn it and you never have to again. haha Unless you're really a gluten for punishment. ;-) Good job and thanks for sharing with us some of those lessons learned.