Rustic X Hall Tree

Rustic Hall Tree
I have been looking for a really nice Hall Tree with out having to spend an entire week just to build it and I found it here. I followed the plans with the exception of the width, which I had to narrow due to where it was to go. I also had to shorten due to wife's height (5 ft 1). Because I help with my friends projects I end up with left over odd and ends and can use them in my projects. The backing I used is T- 1-11, that I sanded down till smooth and then painted. The seat and shelf is a 1 x 12 x 6 bullnose that was left over from a prior project that I cut to 1 x 12 x 3, then ripped the other half to fill in the seat making it 18 inch wide and used the other half to make the top self. The trim was left over from a book shelf that I helped a friend build. I painted the tree but stained the seat, shelf, trim and X with red mahogany stain to match the floor and then sealed with 4 coats of semi-gloss polyurethane.
Thanks for the plans, next project will be a desk for up stairs.

Recommended Skill Level
Beginner