Rustic X TV Console Table

First project attempt. Instructions were really easy to follow. The X's were quite challenging at first, because I only had a Miter Saw. After many trials and errors, I found that building and attaching a 90 degree fence on the saw and then cut the 60 degree angles at the 30, gave beautiful 60 degree cuts. I used Min Wax Special Walnut Stain. I didn't do a lot of sanding because I wanted a gritty rustic feel to it. I used common pine boards. For the hardware, I bought zinc plated L brackets and Large bolts. I used a blow torch to melt the zinc to give it a great look.

Built from Plan(s)
Estimated Cost
$60 in wood, $10 in hardware, $12 in screws,
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Common Pine
Finish Used
Special Walnut Stain
Recommended Skill Level

Free Plans Made Possible By Our Sponsors