I created a sofa table and also one for the loveseat but I don't have it pictured. I used a 2" x 10" for the top and 2" x 6" boards for the legs as well as braces. Added a two outlet and two USB port socket to the table top which was wired to plug into the outlet that would be covered up. Made it so that the legs we're up against the wall allowing for the top to extend just over the back of the couch, and it allowed the two legs to keep the pets from going behind the couch.
Estimated Cost
Roughly $25 it was one 2 by 10 8ft long, one 2 by 6 8 ft long for the legs and 45 degree braces. One wall socket box, a plug, an extension cord, and then necessary items to properly wire it together.
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Eggshell antique white was used for the paint. Minwax pre stain, minwax honey stain, and minwax polyurethane.
Recommended Skill Level
Beginner