Two tone planter

Submitted by Markb25 on Mon, 04/18/2022 - 11:49

Nice and simple planter, the frame uses 2x4 for the legs with 2x3 to frame the lower section internally, along with 1x2 to provide a base for plastic plant pot to sit on. The sides are use 1x4 attached internally with pockets screws and glue so there are no visable fixings ruining the look, additional strips of 1x2 are placed at the very top to give the rim a wider and more aesthetically pleasing finish. Finished in ebony and medium oak followed by three coats of Polyurethane and the addition of small plastic feet/sliders on each corner to prevent damage to the paint if slide along concrete floors.

Comments