Bean bag toss on the wall! This bean bag toss game works is easy to build and hangs on the wall with our french cleat system. We love how it adds a decor or art element to a space. Easy to build with our free step by step plans.
Here's another great gift build idea as part of our Handbuilt Holiday series.
For the Holiday season, Jaime Costiglio and I team up to create a new gift plan every Friday. You can see all of our past plans here.
We love today's plan! Its great for an older child, and can be modified easily for any sport!
We especially love the decor element it adds to the space.
This project was built by Jaime Costiglio - please take a second to hop over and check out her build post with lots more photos, details, and links to the baseball bean bags.
CLICK HERE FOR MORE PHOTOS AND BUILD DETAILS
Pin For Later!
Preparation
2 - 1x4x8
1 - 1x2x4
1 - 1/4" plywood 24" x 48"
1-1/4" and 3/4" brad nails
4 - 1x4 @ 22-1/2"
2 - 1x4 @ 38"
1 - 1x2 @ 22-1/2"
1 - 1x2 @ 24" (NOTE: Jaime used a 1x3 instead here)
1 - 1/4" plywood @ 24" x 32"
Instructions
Step 1
Build the basic frame of the project. Use 1-1/4" brad nails and glue.
Step 2
Attach back support to top with 1-1/4" brad nails and wood glue.
Step 3
Attach front bottom with 1-1/4" brad nails and wood glue.
NOTE: Jaime used a 1x3 here.
Step 4
Attach 1/4" plywood to the front with 3/4" brad nails and glue.
Mark out pattern and drill holes with 4" hole saw or similar.
Sand any rough edges.
Step 5
Layer the 1x4s over top of each other and nail and glue together.
Make sure the french cleat system fits inside the back of the project and hooks around the 1x2 at the top of the project. Trim ends if necessary.
Hang the 1x4s on the wall in the desired location. Hang the project on the french cleat.
