Leave it to Joy Triple Pedestal Wide Farmhouse Table

Submitted by Ana White on Fri, 02/01/2019 - 09:00
Difficulty
Intermediate
| Print this plan

Build this amazing table out of 2x4s and 2x6s! Built by Leave it to Joy, plans by Ana-White.com

rustic dining table extra large
rustic dining table extra large
rustic dining table extra large
rustic dining table extra large

Hope you guys had an awesome weekend!  

I've got a special treat for you today!  And by you, I do mean those of you who emailed me asking if I could make plans happen for Leave it to Joy's amazing triple pedestal farmhouse table, this beauty - 

This table was built by the amazing Joy from Leave it to Joy for just $200 CAD!!! 

She drew inspiration from this table that Ashley from Shanty2Chic and I teamed up on a while back.

 

But double the width!  I just love this larger size, it is so substantial and beautiful!

Joy has been generous enough to let me share plans with you for this table, so make sure you hop over and say thank you, and check out lots more photos and building details right now!

Enjoy the plans following.

Have a great day!

XO Ana

 

CLICK HERE FOR MORE PHOTOS AND BUILD DETAILS FROM LEAVE IT TO JOY

 

 

 

Dimensions
extra wide rustic dining table dimensions
Dimensions shown above

Preparation

Shopping List
  • 12 - 2x4 @ 8 feet long
  • 5 - 2x6 @ 8 feet long
  • 2 - 1x2 @ 8 feet long
  • 3 - Pine project panels 16" x 96" OR 1x wood for tabletop measuring at least 47-1/2" x 95-3/4"
  • 2-1/2" self tapping wood screws
  • 2" brad nails
  • 2-1/2" pocket hole screws
  • wood glue
Cut List

LEGS

  • 12 - 2x4 @ 22-1/2"
  • 12 - 2x4 @ 8-1/2"
  • 3 - 2x4 @ 47" - long point to long point, both ends cut at 22-1/2 degrees off square
  • 3 - 2x4 @ 42-3/4" - long point to long point, both ends cut at 22-1/2 degrees off square
  • 24 - 2x6 @ 3-1/4" - longest point measurement, one end cut at 22-1/2 degrees off square (other end is cut square)
  • 3 - 2x4 @ 44" - long point to long point, both ends cut at 22-1/2 degrees off square
  • 6 - 1x2 @ 3-1/2"

 

BEAMS

  • 2 - 2x6 @ 70"

 

TABLETOP

  • 2 - 2x6 @ 94-1/4"
  • 2 - 1x2 @ 47-1/4"
  • 3 - 2x4 @ 36-1/4"
Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Miter Saw
Brad Nailer
Power Sander

Instructions

Step 1

Build six of the main leg pieces with glue and 2" brad nails. Keep all outside edges flush and make sure a 2x6 piece can fit in opening.

Step 2

Use the 2-1/2" screws to attach to the top and bottom the first layer of 2x4 outside boards. Do this for all three legs.

Step 3

Attach decorative cross support pieces with 2" nails and glue.

Step 4

Attach remaining bottom piece on legs with 2" nails and glue.

Step 5

Step 6

Mark beams and slide legs on to beams. Attach with 2" nails or screws.

Step 7

Build tabletop frame with pocket holes. Then attach the tabletop to the frame with 2" screws and glue.

Step 8

Attach base to the tabletop with 2-1/2" screws.

Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Comments

AliSarah

Tue, 02/02/2016 - 12:26

I think this is a really cool table! We are in the process of making the triple pedestal table but have opted for wrought iron decorative corner brackets instead of the triangles. I'm very excited about it and can't wait to eat at it!!