Build your own entryway wall organizer with hooks. This essential piece is a tried and true option for mudrooms and entryways. Easy to adjust in size for a perfect fit for your space and needs. Free step by step plans with build video by Ana-White.com
See Also: Essential Entryway Bench Plans
Pin For Later!
Shopping List as Shown in Photos (72-3/4" long)
- 1 - 1x10 @ 12 feet long
- 3 - 1x3 @ 8 feet long
- 1 - 1x6 @ 6 feet long
- 1 - 1x8 @ 8 feet long
- 1-1/4" brad nails and wood glue
- 2-1/2" or longer wood screws for hanging to studs in wall, at least 4
For a custom size, create a cut list first, and then figure your materials.
Cut List for 72-3/4" long Shelf (as shown in photos) - but should be modified to fit your space
- 2 - 1x10 @ 17" - sides (same for all sizes)
- 2 - 1x3 @ 70-1/4" - top and back supports (Size Modification: 2-1/2" less than overall desired length of shelf)
- 1 - 1x6 @ 70-1/4" - bottom (Size Modification: 2-1/2" less than the overall desired length of shelf)
- 1 - 1x10 @ 70-1/4" - bottom shelf (Size Modification: 2-1/2" less than the overall desired length of the shelf)
- 3 - 1x10 @ 10-3/4" - dividers (Size Modification: 3 dividers for 4 bays, adjust number of dividers needed depending on number of bays)
- 1 - 1x3 @ 72-3/4" - top (Size Modification: overall desired length of shelf)
- 1 - 1x8 @ 72-3/4" - top (Size Modification: overall desired length of shelf)
Mark the sides with a carpenter's square and cut off at a 45 degree angle, 4" back and 4" up.
Then attach the back with 1-1/4" brad nails and glue to the two sides. Repeat for the top and back 1x3.
TIP: If you have a pocket hole jig, you can also attach all boards in this step with 3/4" pocket holes and 1-1/4" pocket holes crews, placing pocket holes on the back or top sides so they are hidden when finished.
Attach 1x3 to the top, so it is flush to the back and 1/2" overhangs on the ends, with 1-1/4" brad nails and wood glue.
Apply glue to the front edge of 1x3 and top and add the remaining 1x8 top board, so it overhangs 1/2" on sides and front.
Attach with 1-1/4" brad nails and wood glue.
Fill nail holes with wood filler. Lightly sand as needed with 120 grit sandpaper. Paint or stain as desired.
Add hooks, I positioned my hooks centered on each bay, slightly lower than center to allow for easy use of hooks.
Mon, 09/13/2021 - 16:33
Love the shelf and your…
Love the shelf and your helper. :)