A picnic table that looks like a pirate ship! Add an umbrella and every day dining is literally a breeze.
10 - 1x3 Boards, 8 feet long
6 - 1x3 @ 18" (Porthole sides)
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
The most difficult part of this project is going to be getting those boards cut just right - namely this circle. Cut your six boards straight, as shown above, 18" long. Lay out with 1/4" spacing between the boards and draw a 5" circle on the boards. Then cut the circle parts out of each board with a jigsaw. You will need to do this on both sides.
If you have a Kreg Jig™, consider building the top and seats first, and the adding to the top. But if you don't, here's how you can still get those breadboard ends. Screw (predrilled holes) and glue the breadboard ends to the top as shown above. The top will overhang 1/2" on both ends. Seats will sit flush.
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.