Tryde Coffee Table

free coffee table plans planked wood farmhouse style
Difficulty
Intermediate
| Print this plan

Build your own coffee table - this free plan uses basic tools and simple techniques and framing lumber to create a gorgeous coffee table!  With lots of reader submitted photos, cut lists and shopping lists, make this your next project! Free step by step plans from Ana-White.com

If you just need a beautiful surface for a coffee table, this gorgeous solid wood design may be the one!  Featuring simple building techniques and inexpensive materials, this coffee table is the perfect beginner woodworking project.

Related Plans to Check Out

Dimensions
rustic coffee table plans
This is a standard sized coffee table, good for straight sofas. It is a little on the longer side, so may not work well with sectionals.

Preparation

Shopping List
  • 2 - 2x6 @ 8 feet long
  • 1 - 4x4 @ 6 feet long
  • 2 - 2x4 @ 8 feet long
  • About 75 2-1/2" long self tapping star bit screws
  • wood glue
Cut List

 

  • 4 - 2x6 @ 41" - tabletop Atta
  • 2 - 2x4 @ About 22" - breadboard ends, cut to fit
  • 2 - 2x4 @ 14" - end aprons
  • 4 - 4x4 @ 16" - legs
  • 2 - 2x4 @ 38" - side aprons
Cutting Instructions

 

 

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Kreg Jig
Drill
Jigsaw
Miter Saw
Power Sander
General Instructions

 

For long term durability and more professional results, I recommend using a pocket hole joinery system for wood joints.  Here is a video with tips for using a pocket hole jig:

Instructions

Step 1

Cut the 2x6 boards to exactly match in length.

Drill pocket holes on the ends of all the 2x6 boards.

On three of the 2x6 boards, drill pocket holes to attach together edge to edge.

Attach with 2-1/2" pocket hole screws and glue.

Avoid overtightening the pocket hole screws as this can make the tabletop curve inward.

Step 2

Measure the width of the four 2x6 boards and cut 2x4 breadboard ends to match.

Attach through the predrilled pocket holes with 2-1/2" pocket hole screws.

Step 3

Prepare the 2x4 aprons by drilling 1-1/2" pocket holes as shown in diagrams. Note the pocket holes facing upward for attaching the tabletop in later steps (highlighted in red)

Attach to the two legs.

Build two identical.

Step 4

Repeat for the longer side aprons.

Step 5

Center the base on the underside of the tabletop.

Attach base to tabletop through predrilled pocket holes with 2-1/2" pocket hole screws.

Finishing Instructions
Preparation Instructions
Sand entire project with 120 grit sandpaper in direction of wood grain.
Remove sanding residue.
Finish Used
Apply stain lightly with a staining rag, wiping off excess.
Apply clear poly topcoat to seal.

Comments

beth (not verified)

Mon, 12/07/2009 - 04:34

I found your through The Shabby Nest, and I am so glad that she introduced me to you, cause I've been wanting one of those Hyde tables!! When I showed it to my husband, he told me that he thought that he could build it, and now I know that he can!! :) I'm going to show him the plans tonight! Maybe I'll have myself a "Hyde" table this week!! :)
Thanks so much and Merry Christmas! Beth.

Sharon (not verified)

Mon, 12/07/2009 - 04:43

I found you through the Shabby Nest and I'm really Thrilled to find you!!! You're on my Favorites List now! We're headed from Michigan to Florida for a wedding just before Christmas...but I can't wait to get started on one of your plans!! You'll be hearing from me again soon! Merry Christmas!

Maria in TN (not verified)

Fri, 12/11/2009 - 18:12

Ana, is it possible for you to post about how to modify this plan for the console Hyde table? It's PB's skinnier, taller version with a shelf underneath. I would love one of these for behind our sofa...would appreciate any tips or plans you could share. ~Maria

Ana White (not verified)

Sun, 12/13/2009 - 22:41

Hi Maria,

Thank you so much for reading my blog and leaving comments!

There actually is a plan online that is very similar to the Hyde Console Table, but super easy to build - I actually labeled it Simple Cheap and Easy Console Table. It is located here: http://knockoffwood.blogspot.com/2009/11/plan-simple-cheap-and-easy-con…

I will also be posting plans for the Hyde Console table so check back soon.

Thanks again for stopping by! Ana

Funky Junk Interiors (not verified)

Sat, 01/02/2010 - 12:11

Welcome to the party Ana! I'm so glad to have you show the party goers all that you can do. You've amazed me for weeks now and your stuff needs to simply be seen. :)

Ponder... I think you need a feature in your future. :D

Thanks for linking up one of your wonderful creations to SNS! Folks, this girl is baaaad, is she not?!?

Funky Junk Donna

sleepyhead des… (not verified)

Sat, 01/02/2010 - 16:58

Your furniture knock offs are amazing! I came over from FJ and have enjoyed looking around your blog. Love your Restoration Hardware dining table too.

Lisa @ Fern Cr… (not verified)

Sat, 01/02/2010 - 19:35

Your blog and your projects are so amazing! YOU are so amazing! I love this coffee table, it's gorgeous!!

Shelly (not verified)

Sun, 01/03/2010 - 07:08

I am so excited about finding your blog! I have expensive taste without the budget! My husband is a carpenter and has already made me two items that I wanted from the Pottery Barn...
My "honey do" list is endless...and now I can just pull this site up and show him exactly what I want. Thank you thank you!

Proper Prim (not verified)

Sun, 01/03/2010 - 13:54

I just found you through Funky Junk and I so happy I did. Thank you so much for sharing this. Your directions are so easy I could make this myself.

Deb

Veronica King:… (not verified)

Tue, 01/05/2010 - 17:07

Where has this blog been all my life?!? I can't believe I haven't stumbled across it sooner. I'm in love! I can't wait to do one of these amazing projects! =]

Jori Hodgson (not verified)

Thu, 01/21/2010 - 22:01

When you go to the lumber store it seems like they have several different types of wood in 1x4's and 2x2's, etc. What type of board to you get? Better yet, what type of wood did Beth use on hers?

Thanks so much!

Jill (not verified)

Fri, 01/22/2010 - 03:05

Wow! I love this! I'm wondering how difficult it would be to convert this project to a dining table? I think it would look great and survive my four kids! =D

Ana White (not verified)

Fri, 01/22/2010 - 04:42

Beth used regular old pine boards. These are the cheapest. You can use even stud grade lumber. I know she said she choose boards that were rough looking to get the reclaimed look, but just make sure you buy straight boards.

Peggy (not verified)

Fri, 01/29/2010 - 12:48

Wow! What a great coffee table! I totally intend to make this my first project of your site, which I am telling everyone about. I have a question though, my coffee table area is VERY small. Finding one this small is impossible, so being able to build one is great! The current badly painted Freecycle coffee table is 32.5"L x 16"W x 17"H. What modifications would I need to make to make it roughly this same size? Thanks!

SaraReno (not verified)

Sun, 02/21/2010 - 07:40

I just finished building this last night (still need to do the stain, etc. before I send pics) and the plans were great! The only suggestion is that it looks like there isn't a mention of attaching part E. I suppose it's fairly obvious that I needed to but it might not hurt to add that in.

Anonymous (not verified)

Thu, 02/25/2010 - 18:34

I built this project and it came out perfect. You did leave out a picture for one of the pieces but it was easy enough to figure out. What an easy first project. Thanks.

Pacific NW Blogfan (not verified)

Thu, 03/04/2010 - 02:41

I just came across this website and it is awesome. Hopefully you continue to provide all of us with great plans and instructional videos. Thanks!

Wendy (not verified)

Thu, 04/22/2010 - 21:10

The coolest part about this post was that you stayed up until 2:30am writing it! What dedication! This is my next project and I have become obsessed with building! Thanks for your hard work ANA!

Virginie (not verified)

Fri, 04/23/2010 - 07:09

Hi Ana!
I know you have written it elsewhere, I haven't been able to find it, but what adjustments need to be made for the elusive 4x4? Are the measurements relatively the same if we use two 2x4?

Ana White (not verified)

Fri, 04/23/2010 - 07:15

Hi, when you use 2 - 2x4s remember that the overall dimensions will be 3" x 3 1/2" instead of the dimensions of of a 4x4 3 1/2" x 3 1/2". Good luck with your table. :)

ehendric (not verified)

Sat, 05/01/2010 - 19:13

Do you know where you can get the 2 3/4 inch screws? I can find 2.5 inch and 3 inch but no 2.75 inch. Can I just use 2.5 inch instead? Love your new site.

Thanks

liz (not verified)

Sun, 05/09/2010 - 18:15

Thank you so much for posting these plans. It quickly became my weekend project.

Oh for those asked I used 2.5 inch screws and they worked perfect. I personally don't think I would have liked using anything longer. Anyways here is a link to my master piece http://tinyurl.com/2625wej

igotsonshine (not verified)

Mon, 07/12/2010 - 15:29

Hi Ana! I happened upon your website the other night and I am so psyched! My hubby and I will be moving shortly to a new home and I was wondering how I was going to be able to finance all the things I wanted. Now I know I can build them, thanks to you. My hubby even said he'd help, however, once he sees my list, he might change his mind, lol! Anyway, I believe this coffee table will be my very first project. However, what I really want is to modify it, kind of like that reader whose picture appears; "supersized" you called it. I would like a larger size than the rectangular plans you offer. I would like a square coffee table, the type that are popular now and used with sectionals. Since I haven't built furniture before, I definitely don't feel comfortable just winging it. Anyway, would you consider offering measurements for a square tryde coffee table? Pretty please? Thank you for all that you do. You are awesome; a true inspiration! God bless you!

Denise (not verified)

Mon, 07/19/2010 - 05:17

Hi Ana! I am super excited that a friend of mine shared your blog via Facebook. I love me a good power tool, but usually don't have the know it all to get the plans in my head all figured out & built. SUPER excited to have found you! Thanks for posting all your knowledge!
XoX
Denise

Meg (not verified)

Mon, 08/30/2010 - 09:30

Could a variation of this be made so that there is storage for blankets and quilts underneath. I would love it to be the dimensions of the one that you have pictured above that reader Sarah made. Something where the top opens up and there would be hidden storage. Maybe the hinges could be braced down a center stationary brace and then it opened on two sides so the whole top wasn't to heavy for little hands to open....

mae (not verified)

Thu, 09/02/2010 - 12:12

hello ana!

i love this coffee table! i was wondering if i could follow the same procedure to turn it into a farmhouse table? I know you have another plan for that, but i just love the chunky legs of this table. what do you think?

thanks a bunch!

your biggest fan!

heatherlowman (not verified)

Thu, 09/09/2010 - 14:51

My daughter's pre-k teachers told me about this website just this afternoon. I just have to tell you how much I LOVE THIS SITE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! my husband is a general contractor ,but has no idea about building furniture. But now that I see how easy you make it and TRULY easy to understand directions I can't wait to build this coffee table!!! I do love me some pottery barn butwho can afford it now adays! Once again Thank You SOOOOO much for this totaly awesome wedsite. If I could see you I'd hug you I'm so Happy!!! lol

Laura R. (not verified)

Wed, 12/22/2010 - 17:54

My 23 yr old and I are going to make this and the Cara bookshelf this weekend. Is there an easy way to add a lower shelf to the coffee table? I would love to have some square basket 'catch-alls' underneath!

K (not verified)

Wed, 01/05/2011 - 11:56

Love this table! Can you tell me what stain was used on the table that is shown with the 4 votive candles ?

Aunt LoLo (not verified)

Wed, 01/05/2011 - 16:29

This is exactly what I've been looking for! And hubbie's working late all month. Maybe I can get it built before he can say "you probably can't." LOL (my first project, the cube bench, is still in the garage waiting for its final coat of top coat. I'm slow!! haha The bench has been there for a month. ;-))

Jeremy (not verified)

Tue, 02/01/2011 - 06:21

Hey Ana, do you recommend using pine for the top or something a little harder like oak?? Also I haven't been able to find 4x4's that are untreated...they all have that ugly green tint to them in the store (Lowes or HD are about the only places around here) does that really matter or will the stain take care of it? thanks so much it looks great and I can't wait to build it!

ptay

Sun, 07/03/2011 - 20:10

I adore this coffee table! I showed it to my husband and he loved it too! Just as soon as I finish my clients furniture I will be building this one for my home. Thanks for the awesome plans!

Greg (not verified)

Mon, 08/22/2011 - 14:13

Ana, let me start by saying I'm thrilled that I found your site. I've been working on building a coffee table, but decided to scrap it and start over. I originally wanted to build it with dowels but it's a pain to make sure everything lines up perfectly. Your design definitely seems more simple (and fun) to put together.
Anyway, the only places for me to get wood in my area are Lowe's and Home Depot. The only problem is that neither sell untreated 4x4s. Is it best to use a different stain for these? I know it has to be dry first, but do you know if it will take the stain the same as untreated wood?

Alex (not verified)

Wed, 08/31/2011 - 19:38

Dose anyone know how much this table will hold? I wanna put an aquarium on it and this could weigh upto 550lbs. Do you think this is a stable enough table? And sugestions on making it more stable?

Guest (not verified)

Tue, 09/27/2011 - 04:19

Hi, I just made this Tryde Coffee Table and I'm so pleased with it! I discovered your site while using google images to find a rustic coffee table that I liked. Imagine my surprise when I realized my favorite was a DIY project...Yay! It is probably the sturdiest piece of furniture in my whole house! My husband manages a lumber yard/warehouse at a home hardware store and with his discount I was able to get everything I needed for $20! I can't wait to tackle my next project...Reclaimed Wood Headboard! Thanks so much for sharing your wonderful plans with all of us!

gregmasciola

Tue, 10/18/2011 - 22:43

I just finished building this coffee table and am very happy with it. I didn't stick completely to the plans though. I had a bit of 2x4 scrap wood laying around, so I just used that for the side & end aprons, attaching them flush with the legs. I also used 2x4 for the legs, because my Lowes and Home Depot don't sell untreated 4x4s. I don't know what's more satisfying, having my new table in the living room or using my old falling apart one as firewood.

jimboski93

Thu, 10/27/2011 - 07:41

I really like the look in the first picture at the beginning of the post, or even the first picture in the "additional photos" section.

What stains were used to achieve this look?

Thanks

Naya (not verified)

Thu, 11/03/2011 - 17:51

This was an amazing plan to build from...thank you Ana! I did have one suggestion as my cutting skill are still improving:) I put on one side piece and then added the long middle pieces. After dry fitting everything, I then cut and added the second end piece. That was easier than trying to get my 2x4s to cut exactly to fit inside the 2 set side pieces. I also brought my side pieces in just a bit to give them more support. Instead of just filling my screw holes, I strategically spaced them on the boards. I then went and added some rustic brads over the hole. It gave it a very unique look. This was a great starter plan. Don't doubt yourself...just try it!

Happy Cutting!

Steve P (not verified)

Thu, 11/10/2011 - 05:16

Can anyone please provide a close up photo of how they screwed everything together? (Especially step 2, as these will be seen in the final product). I was thinking about countersinking them deep and filling them in with dowels or hole caps.

BTW, I stumbled upon this website yesterday by ways of artofmanliness.com and I'm already planning what I want to make. This coffee table will be my first project and will be my Christmas present to my fiance. Thank you Ana and the whole community. This is a invaluable resource!

Frequently Asked Questions

Wood Questions

What kind of wood should I use?
Most of our plans use standard construction lumber like pine or fir. It's affordable, easy to work with, and easy to find. It's also rapidly renewing and biodegradable, so a great eco friendly choice!

Can I use hardwoods instead?
Yes—just keep in mind they're heavier, cost more, and can be tougher on tools and harder to join together and finish. I recommend not tackling a hardwood project until after you have built several softwood projects.

What if my boards are warped?
Choose the straightest boards at the store. You can often work around slight warps by cutting them into shorter pieces.

What wood should I use for outdoor furniture?
Use red-toned or pressure-treated 2x lumber for framing, and cedar or cedar fence pickets for the decking. Outdoor furniture should be built like a deck—your local home center can help recommend the right wood for your climate.

Will my wood move or warp after I build?
Potentially, especially in humid climates. Let your wood acclimate indoors before building. Once acclimated and kept in a stable environment, movement should be minimal. Remember, most houses are built using framing lumber - it's all about keeping moisture down indoors.

Cutting Questions

Do I need a miter saw?
A miter saw is great, creating fast, safe, and precise cuts, even for beginners. But most plans can be built with a circular saw and a straight edge. If using a circular saw to cut, take time to practice, and get good at making cuts, before cutting your project boards.

How do I get clean cuts with a circular saw?
Clamp your board, measure twice, cut slow, and use a sharp blade. This takes practice, so spend some time making cuts. I go through becoming proficient at freehand cutting in my course, it is worth taking if you want to master this skill.

Will the store cut my wood?
Yes—most stores will do rough cuts to help you transport your materials home. But from store to store, the quality of cuts could greatly vary.

Joinery Questions

What screws should I use?
We recommend star-head self tapping screws for framing, most common sizes are 2-1/2", 1-3/4". Pre-drill if close to the edge or you find your wood is splitting.

Do I have to use pocket holes?
Pocket holes are the cheapest, easiest and fastest way to do some joints - like edge to edge or a hidden fastener joint. There are other methods, but these can be time consuming and expensive. We recommend using pocket holes as indicated in plans for best results.

How do I keep things square?
Use a speed square and measure diagonals after each step. Always clamp joints before screwing to keep them tight and flush.

Finishing Questions

Stain or paint before or after building?
A quick sand before and a full finish after gives the best results. Pre-finish if you're doing two-tone or detailed finishes.

What type of finish?
Use oil-based or water-based stain. For paint, cabinet-grade latex or enamel works great. High use surfaces on indoor projects should get a coat of polyurethane, I recommend a Helsman or Spar or other flexible poly that won't crack or peel with wood movement. For exterior projects, use a finish suitable for exterior fences.

How to get a smooth finish?
Start with a well sanded project. Sand between coats (220 grit), wipe clean, and apply light coats with a foam brush or roller.

Plan Questions

Can I change the size?
Many people do, and that's the great thing about building your own furniture! But do keep in mind going bigger might mean more supports are required, and often plans are optimized for minimal material waste.

Are these beginner-friendly?
Yes—plans are written with simple tools and clear steps in mind, with every effort to make plans as simple as possible.

Can I sell what I build?
Absolutely! Just don’t resell or repost the plans themselves.

General Questions

What tools do I really need?
A drill, circular saw, tape measure, square, and a few clamps will get you through most projects.

Do I need a workshop?
Nope! A driveway or small patio is plenty to get started, just make sure you have a level place to work. If you find you are building several projects a year, creating a small workbench is a great way to store tools and have a dedicated workspace.

What if I mess up?
Wood filler, sanding, or flipping boards goes a long way. Mistakes are part of the process!

What can I do to make my projects look more professional?
Start with straight boards, make accurate cuts, clamp all joints, and line up everything neatly. Sand thoroughly, use a neutral finish, and apply it in light coats for a clean look.

I've never built anything before. Where should I start?
Start with a few smaller softwood projects to get hands-on experience. Or if you're tackling a big project, buy a little extra lumber and practice your cuts and joints first. If possible, work with someone who has a bit of experience.

Care & Maintenance

How long will my furniture last?
With good joinery and regular care, your DIY furniture can last for decades. I have pieces in my own home that are over 20 years old and still going strong! One of the best parts about DIY furniture is that it’s easy to repaint, refinish, or repair—so your projects can grow and adapt with you.

How should I care for outdoor furniture?
Lightly pressure wash or hose it down once or twice a year. Tighten screws and reapply finish as needed to protect it—just like a deck or fence. A little upkeep goes a long way in extending the life of your furniture.

How about indoor furniture?
Regularly dust or wipe with a damp cloth. If it starts to look worn, a light sanding and touch-up paint or stain can refresh it in no time. DIY pieces are meant to be durable and fixable—so don’t be afraid to give them some love now and then.

Want to Build with Confidence?

Check out my ebook: 12 Skills to Build Your Own Furniture
It walks you through the core skills every builder needs—measuring, cutting, joinery, and finishing—so you can build beautiful furniture that lasts.

Still Have Questions?

Email us anytime at [email protected] and we’ll be happy to help!