Tryde Media Console

Submitted by mfreeman37 on Mon, 06/27/2011 - 15:08

I built the Tryde Media Console with a few modifications. I had to increase the size to of the console to accommodate the 60" T.V. that it would be housing. You will also notice that I added a shelf in the top center of the console so that I could fit more components on the top. I also modified the console plans to create new plans for building two matching bookcases, one for either side of the console, giving it the "built-in" appearance. This turned out beautifully and we couldn't be happier with the plans that we downloaded from Ana-white.com! P.S. - The Kreg jig was a must for this project. All of the boards creating the back of the console are joined using pocket screws, pre-drilled with the kreg jig. After using this inexpensive tool for about ten minutes, I couldn't believe how long I had gone on without it!

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Primed and Painted
Recommended Skill Level
Intermediate

Comments

Amberwms (not verified)

Wed, 10/24/2012 - 21:34

Can you please share your plans love this!!