Creating a board and batten wall treatment is easy and doable by any do it yourselfer. This step by step tutorial will help you add beauty and architectural interest to a blank wall on the tightest of budgets. Beyond style points, you can use the finished board and batten treatment as a picture ledge or for towel or coat hooks.
Per 8 feet of wall space, boards spaced every 12" and more than 48" in height, you will need . . .
1 - 1x3 @ 8 feet long
10 - 1x2 @ 8 feet long
1 - 1x4 @ 8 feet long (if you need to replace moulding)
Liquid Nails Adhesive
I choose to use pine boards for my Board and Batten project because it is formaldehyde free. You can treat your walls with Board and Batten cut from MDF as well.
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
Now cut to fit 1x2s to fit between the baseboard and the top board. Attach with nails and glue, to the studs in the wall. Use a level.
Now of course you should be aware of the finished design, and if a board just doesn't work, or your wall wasn't built to code, don't feel like you must attach a board to every stud.
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.