Frequently Asked Questions
Wood Questions
What kind of wood should I use?
Most of our plans use standard construction lumber like pine or fir. It's affordable, easy to work with, and easy to find. It's also rapidly renewing and biodegradable, so a great eco friendly choice!
Can I use hardwoods instead?
Yes—just keep in mind they're heavier, cost more, and can be tougher on tools and harder to join together and finish. I recommend not tackling a hardwood project until after you have built several softwood projects.
What if my boards are warped?
Choose the straightest boards at the store. You can often work around slight warps by cutting them into shorter pieces.
What wood should I use for outdoor furniture?
Use red-toned or pressure-treated 2x lumber for framing, and cedar or cedar fence pickets for the decking. Outdoor furniture should be built like a deck—your local home center can help recommend the right wood for your climate.
Will my wood move or warp after I build?
Potentially, especially in humid climates. Let your wood acclimate indoors before building. Once acclimated and kept in a stable environment, movement should be minimal. Remember, most houses are built using framing lumber - it's all about keeping moisture down indoors.
Cutting Questions
Do I need a miter saw?
A miter saw is great, creating fast, safe, and precise cuts, even for beginners. But most plans can be built with a circular saw and a straight edge. If using a circular saw to cut, take time to practice, and get good at making cuts, before cutting your project boards.
How do I get clean cuts with a circular saw?
Clamp your board, measure twice, cut slow, and use a sharp blade. This takes practice, so spend some time making cuts. I go through becoming proficient at freehand cutting in my course, it is worth taking if you want to master this skill.
Will the store cut my wood?
Yes—most stores will do rough cuts to help you transport your materials home. But from store to store, the quality of cuts could greatly vary.
Joinery Questions
What screws should I use?
We recommend star-head self tapping screws for framing, most common sizes are 2-1/2", 1-3/4". Pre-drill if close to the edge or you find your wood is splitting.
Do I have to use pocket holes?
Pocket holes are the cheapest, easiest and fastest way to do some joints - like edge to edge or a hidden fastener joint. There are other methods, but these can be time consuming and expensive. We recommend using pocket holes as indicated in plans for best results.
How do I keep things square?
Use a speed square and measure diagonals after each step. Always clamp joints before screwing to keep them tight and flush.
Finishing Questions
Stain or paint before or after building?
A quick sand before and a full finish after gives the best results. Pre-finish if you're doing two-tone or detailed finishes.
What type of finish?
Use oil-based or water-based stain. For paint, cabinet-grade latex or enamel works great. High use surfaces on indoor projects should get a coat of polyurethane, I recommend a Helsman or Spar or other flexible poly that won't crack or peel with wood movement. For exterior projects, use a finish suitable for exterior fences.
How to get a smooth finish?
Start with a well sanded project. Sand between coats (220 grit), wipe clean, and apply light coats with a foam brush or roller.
Plan Questions
Can I change the size?
Many people do, and that's the great thing about building your own furniture! But do keep in mind going bigger might mean more supports are required, and often plans are optimized for minimal material waste.
Are these beginner-friendly?
Yes—plans are written with simple tools and clear steps in mind, with every effort to make plans as simple as possible.
Can I sell what I build?
Absolutely! Just don’t resell or repost the plans themselves.
General Questions
What tools do I really need?
A drill, circular saw, tape measure, square, and a few clamps will get you through most projects.
Do I need a workshop?
Nope! A driveway or small patio is plenty to get started, just make sure you have a level place to work. If you find you are building several projects a year, creating a small workbench is a great way to store tools and have a dedicated workspace.
What if I mess up?
Wood filler, sanding, or flipping boards goes a long way. Mistakes are part of the process!
What can I do to make my projects look more professional?
Start with straight boards, make accurate cuts, clamp all joints, and line up everything neatly. Sand thoroughly, use a neutral finish, and apply it in light coats for a clean look.
I've never built anything before. Where should I start?
Start with a few smaller softwood projects to get hands-on experience. Or if you're tackling a big project, buy a little extra lumber and practice your cuts and joints first. If possible, work with someone who has a bit of experience.
Care & Maintenance
How long will my furniture last?
With good joinery and regular care, your DIY furniture can last for decades. I have pieces in my own home that are over 20 years old and still going strong! One of the best parts about DIY furniture is that it’s easy to repaint, refinish, or repair—so your projects can grow and adapt with you.
How should I care for outdoor furniture?
Lightly pressure wash or hose it down once or twice a year. Tighten screws and reapply finish as needed to protect it—just like a deck or fence. A little upkeep goes a long way in extending the life of your furniture.
How about indoor furniture?
Regularly dust or wipe with a damp cloth. If it starts to look worn, a light sanding and touch-up paint or stain can refresh it in no time. DIY pieces are meant to be durable and fixable—so don’t be afraid to give them some love now and then.
Want to Build with Confidence?
Check out my ebook: 12 Skills to Build Your Own Furniture
It walks you through the core skills every builder needs—measuring, cutting, joinery, and finishing—so you can build beautiful furniture that lasts.
Still Have Questions?
Email us anytime at [email protected] and we’ll be happy to help!
Comments
blessednest
Thu, 08/11/2011 - 22:52
GAH!!!
ANA! WHYYYY?!?!?! lol, i just made my list of "to makes" for our homemade Christmas. I was going to make two of the farmhouse doll beds [one for each of our daughters and their AG doll & blabla doll]
BUT
I.LOVE.THIS!!!! I might make the bunks instead. or make bunks out of the farmhouse beds lol!
LOVE IT! THANK YOU!!!! You & your plans pretty much rock my stars. true story.
mamma_joy
Fri, 08/12/2011 - 01:35
A trundle?!?
I think if you left the ladder support piece shorter, you could even swing adding a trundle! My posted trundle plan would be a little tall, but you could make it work with a 1x3 instead of a 1x4--easy modification! That'd be great for my neighbor with three girls!
Athena (not verified)
Fri, 08/12/2011 - 05:57
I seriously can not wait to
I seriously can not wait to make this! My girls will be so excited.
spiceylg
Fri, 08/12/2011 - 07:36
wow
You continue to amaze! This is too adorable!
Guest (not verified)
Fri, 08/12/2011 - 08:09
ANA is AWESOME!!!!
Ana....this bunk bed is SO PERFECT for our dolls! I knew you would eventually post a bunk bed, and this is why I have waited for your post...because these plans are AWESOME!!! I have linked to your plans for my readers to enjoy. Thanks for these....REALLY!!!! And thanks for "teaching" me to build, girl! You ROCK!!! :)
Kristi @ Pieces for Reese
http://piecesforreese.blogspot.com/2011/08/18-doll-ana-white-bunk-bed.h…
jeanne (not verified)
Fri, 08/12/2011 - 08:29
really want to try this
I realllly want to make a bed like this for my girls. And I love the paper roll holder on the adorable desk as well!!! And the "Beach Hair" We have a lot of that at my house too :) I can't get my littlest to hold still to even pull her bangs out of her face most times. Well... they aren't so much bangs anymore anyway...
I love your stuff. Some day I will build stuff.
Cherie Heltne (not verified)
Fri, 08/12/2011 - 08:31
Nice!
This is great. I just made my own farmhouse style bunk bed set for my daughter a couple of weeks ago when she got the bitty twins. I will be making this one for my daughter's friend, too.
Miasmom (not verified)
Fri, 08/12/2011 - 10:10
1x1s
Would 3/4" wooden dowels work instead of the 1x1? And I think you're missing 2 1x1s at 19" for an extra set of cleats. :)
I can't wait to make this! I already made the farmhouse doll bed for my daughter, but she's managed to pile more than 3 dolls on it at a time. Thank you, thank you for your wonderful and generous plans!
guest (not verified)
Fri, 08/19/2011 - 19:24
I am totally making this.
I just want to say how much I LOVE this website. I have never made anything out of wood in my life, but with your detailed instructions and the shopping list and cutting list etc. (you have thought of EVERYTHING!) I feel absolutely confident that I can do this.
I don't even have a saw, but I know my local hardware store will cut the wood for me (for a price, but still it's totally worth it).
Vladimir (not verified)
Sun, 09/04/2011 - 23:52
I just want to tell you thanks.
Hi Ana, my name is Vladimir, I'm from Russia. A live in Syberia. I read your blog and lost you year ago. Then a seek you and I happy to found your site. I can,t speak English well, but can read with dictionary. I love your life story. I just want to tell you that. I like all that you builds. Is there in your site SketchUp models your builds? I want to build toy bed for my doughter. Of course I can use you pictures, but if you give to people you models, they can translate mesures. This certain not necessarily. Forgive me for my bad engilesh.
Mairi (not verified)
Wed, 09/07/2011 - 02:51
Bed!
Hi there! I've absolutely loved making this! Thanks so much for the pattern! You are a legend! Just one thing I noticed... In the cutting unless I'm going mad it should be 4 x 1x1 x 19" for the mattress supports. No biggie but it may make the difference between one length of timber and two!
Thanks again!
Mairi
My Favorite Dolly (not verified)
Thu, 09/22/2011 - 21:39
Awesome!
I'm a doll maker, and I have 2 boys, with 2 dolls, and it's virtually impossible to find doll beds for boy dolls. I figured I'd have to make it myself. I'm a sewer- not a woodworker, but this looks like something I can definitely do. Thanks so much for posting it!
~Erin
Guest (not verified)
Tue, 10/04/2011 - 14:37
Bunkbeds
Thanks for the plans! I just completed this project and it came out great. I don't have a Kreg jig so I drilled holes and used dowells so that all front facing surfaces are nice and smooth. I wanted to use wood stain it came out so well but my daughter wants to paint it pink which is fine by me as it's for her!
Thanks again!
Guest (not verified)
Tue, 10/04/2011 - 14:37
Bunkbeds
Thanks for the plans! I just completed this project and it came out great. I don't have a Kreg jig so I drilled holes and used dowells so that all front facing surfaces are nice and smooth. I wanted to use wood stain it came out so well but my daughter wants to paint it pink which is fine by me as it's for her!
Thanks again!
margjack
Thu, 10/20/2011 - 14:27
I think there are a couple of
I think there are a couple of errors in the cut list. As someone already pointed out, there should be 4 1"x1"x19" cuts for the cleats. To get all of the cuts out of one 1"x1"x8', I made the 4 cleats about 16 inches each.
Also, you can't get all of the cuts out of 3 1x2s. I didn't want to run back to the store, so I left out the middle side rails on the top bunk. I kind of like the more "mod" look! (and it's not like you need the rail for safety!)
Otherwise, this plan is super easy and sturdy - I had fun making it!
Flipper bed (not verified)
Fri, 11/04/2011 - 01:02
Decorating a kid's bedroom
Decorating a kid's bedroom can be fun. You can include playful and appealing designs that will be suitable for your kids.
Imagination and creativity can be most experimented in this part of your home where the Decor has to be changed more frequently with the growing age and maturity of the children and also their changing tastes and ideals.
Paul H. (not verified)
Mon, 11/14/2011 - 08:28
Attaching the rungs
I am building two of these for my daughters for Christmas. The first one is assembled and ready for finishing work.
I believe I have learned from my mistakes during the assembly process and will be better prepared for the second one. On step 5 (attaching the rungs) the rungs butt up against one end so I wasn't sure the best way to attach it.
To anyone who has built this (or Ana), did you attach that end using a pocket hole on the back side or just a use a screw through the outside?
I have all the wood cut and the pocket holes drilled for the second bed. The Kreg Mini Jig (and accessories) was the most expensive part of this project but well worth it in the end.
Donna Huisinga (not verified)
Tue, 12/13/2011 - 16:08
thank you
Ana,
How generous of you to share these instructions. I think this is an awesome project. I only wish I had someone to make it for. I can only imagine a little girl's delight when she receives this. I'm so glad I found you. I just pinned it.
Guest (not verified)
Mon, 01/16/2012 - 23:11
Amazing bed
My daughters birthday is in a couple of days do we decided that we are getting her her 3rd doll but she's always asking for a bed so this plan is PERFECT!!!! We are gonna make two of them.
jennybriggs1970
Tue, 01/24/2012 - 21:31
!x1
Has anyone ever, used 1x2 instead of the 1x1? I cant find any 1x1 for less than $5 a foot? That is almost the whole $10 rught there?
pjhaan
Tue, 02/14/2012 - 10:07
If you have a table saw, you
If you have a table saw, you could rip a 1x2.
I used a 1x1 but cut it from an 18 foot board in the trim/molding area that charges by the linear foot. I think it was about $2/foot. I build two so I think this was the most expensive part of the project!
Guest (not verified)
Sun, 02/12/2012 - 07:16
Buy it?
Could you make these for sale because I don't have the skills or equipment to make the bunk bends and they are so nice!!!
Guest (not verified)
Thu, 02/16/2012 - 08:20
Bunk bed plan
Excellent design and simple to make. One minor problem is the quantities of wood required. 1X2 should read 4 1X2 @ 8' and not 3 (check cut list total quantities). Cut list should also read 1X1 @19" qty 4 not 2 (base supports).
Thanks
Guest (not verified)
Fri, 03/23/2012 - 17:59
WOW!
Is there a way to make a smaller one?
Cherica (not verified)
Thu, 04/05/2012 - 18:41
Just built this bunk bed today.
My daughter asked for this for her birthday. I have been bitten by the building bug. This was my first wood working project and I had a blast!! I can't wait to tackle my next project!
Jen A (not verified)
Wed, 05/09/2012 - 09:28
Prett Easy
I am in the process of completing one of these. It was very easy to do. My onkly suggestion is that if you use a 3/4x3/4x8 piece of trim to use shorter nails or screws then listed. Otherwise the points will stick out the other end.
Can't wait to add the final touches and paint it!
I have a feeling I will be making more for friends and family!
ann-sewsalot (not verified)
Sat, 09/22/2012 - 18:48
Bunk Bed and plans
This is so awesome of you to share these plans(along with your others). I started one of these today. Got it almost done, and would have had it completed had I not ran out of board and had to wait for my hubby to bring me another one.
As mentioned previously, the supply list is a bit shy of having enough 1x2's. Also, I couldn't find 1x1's, other than in the dowel section(I don't have a table saw to rip a 1x2). I decided 1/2" square dowel would be plenty big enough for the cleats. I just cut 2 of them in half, giving me 4 18" cleats. I just centered them. I don't think the 1/2" missing at each end will make any difference in the finished product. I'm also going to use a 1x2 for the ladder support because the 1/2" just doesn't look right and I have extra 1x2 now! I'll post pics of my finished one soon.
Thanks again, Ana! You Rock!
Tammie (not verified)
Thu, 10/11/2012 - 16:25
DIY bunkbed
My husband just made this for our granddaughter and we aren't sure where you can make this for $10. It's very cute, but cost more than $10 project.
Richard (not verified)
Fri, 12/21/2012 - 06:33
Suggestions for Modification and Comments on 18 inDoll Bunk Bed
I agree with several earlier posts that this project requires 4 pieces of 1x4 8' long.
Also, made this bed 1.5 inches wider by moving the long rail to the outside edge. This required the left hand side of the ladder to be notched where it intersected with the bed frame. Relatively easy to do and use glue to secure.
Also, made the bed using dowel rods and glue only to connect all joints. This added more complexity and would suggest nail gun and glue for future ones. But, this was for my granddaughter Naomi.
Denise S. (not verified)
Thu, 01/10/2013 - 10:03
Thanks!!!!
My husband made the bed, I painted it and made the bedding and our daughter LOVES it!!! I love it too. It is super cute and perfect for her dolls. Thanks for sharing your plans.
Denise
PS-My husband did say it took him much longer to make it than you. ;)
TheReal309
Sat, 09/14/2013 - 07:01
Great Project
My wife found this project and had me build it. Very straightforward and easy. Two things worth mentioning, though. As others have said, you need four 19" cleats for the mattresses. Also, kreg joints are meant to have two holes drilled in each piece of wood to prevent rotation of the wood. This rotation can be prevented in one of four ways. Firstly, on each piece of wood requiring a kreg joint, you could drill two holes. The pieces are narrow so this is tricky at best. The next option is to to drill the hole on one end of the board closer to one edge and drill the hole at the other end of the board closer to the other edge. This way, the holes aren't in line with one another and the board won't rotate. The third option is to glue each joint before "kregging" it. The fourth option is to make use of small pin nails. Gluing each joint adds some time, but is probably the best option.
The finished bed is adorable and I can't wait to give it to my daughter for her birthday next month. Thank you so much, Ana, for a wonderful, inspirational website!
RParsons
Mon, 09/30/2013 - 06:22
I love this plan
My Wife came across your website, and absolutely loves it. I'm already in the process of making one bunk bed for my daughter, with plans to build another for my niece, as they are both getting dolls for Christmas. I did notice that others were commenting about the missing 19" lengths of 1x1 from the plans, should be 4 in total, not 2. As for material, I originally went out and bought a bunch of 1x2 pieces 8 feet long, but they weren't cheap, around $5.50 each. I've since found that I can get Knotty Pine shelving pieces from my local Kents building supplies (I'm in St. John's, Newfoundland) for around $5.27 for a 6 foot by 10" piece. Each length can be ripped down into four 1x2 pieces and one 1x1 piece, all 6 feet long. Way cheaper, and can just buy a few extra as needed :)
Schillil
Wed, 09/24/2014 - 12:08
Perfect for Christmas
I showed this plan to my dad who is the woodworker in the family with all the tools. He just put it together yesterday and sent me pictures of it today. My 7 year old is getting her first American Girl doll this Christmas. So excited.
jf646479
Sat, 01/10/2015 - 19:37
Errors in the wood required and cut list
This requires more than 3 boards of 1x2 at 8'. It requires at least another 3 feet of 1x2
Also the cut list says you need 2 of the 1x1x 19 inches but that is an error, you need 4, one for each side for both top and bottom to mount the floor of each bunk. That takes the total of 1x1 over 8 feet as well.
So buy an extra 1x2 and either use segments of 1x1 or buy another foot of 1x1 as well.
In reply to Errors in the wood required and cut list by jf646479
Ana White
Sun, 01/11/2015 - 11:15
Thanks, all fixed!
Thanks, all fixed!
starkie
Fri, 12/22/2017 - 02:10
I build this bed
Thank you for inspiration!
I liked the project. Little Emily is getting the Bed as a Christmas Gift from her Grandpa (that's me).
I had struggle with the dimensions though. 1x2 turned out to be rather 1 1/4 x 3/4 - or did i get something wrong?
anm8ed
Sat, 06/06/2020 - 18:57
Built this today. The wife…
Built this today. The wife made the mattresses for it and it came out nice. I would post a picture but I have not figured where to do that. But I great and my 8 year old loves it.