How to build a turned leg coffee table. Step by step plan included video tutorial to build coffee table.
4 - 3 1/2" turned coffee table legs
6 - 1x4 @ 8 feet long
7 - 1x4 @ 45" long (tabletop boards)
2 - 1x4 @ 24 1/2" (breadboard ends)
2 - 1x4 @ 16 1/2"
2 - 1x4 @ 41"
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
The key to a great tabletop is making sure all of your tabletop boards are cut to the exact length, and then joined with pocket holes from underneath. I like to clamp every screw just to make sure we are getting the smoothest edge to edge joint possible.
If you are using glue, be very careful not to let glue dry on the tabletop and stain the surface.
If your ends are not perfectly straight, there is no shame in trimming with a circular saw. It's about getting a great finished project!
Another consideration is to try to alternate the grain of the boards so the boards aren't all facing bark side up or bark side down. This is done to prevent your tabletop from warping in one direction.
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.