DIY Octagon Picnic Table – Free Plans with Step-by-Step Instructions

Octagon picnic table free plans
Error: View not found.
Difficulty
Advanced
| Print this plan

Build your own eight-sided (octagon) picnic table with this completely free woodworking plan! This round-style picnic table offers a unique, space-efficient design that seats up to 8 people—perfect for outdoor dining, family gatherings, and backyard events. With step-by-step instructions, shopping and cut lists, and beginner-friendly guidance, you can build this eye-catching table in a weekend using basic tools and materials. A sturdy, stylish project that’s made to last!

 

Reader submitted photo

There’s something truly special about sitting around this octagon picnic table. With its round, eight-sided design, everyone faces inward, making conversations easy and natural. Whether you’re hosting a backyard barbecue, birthday party, or simply enjoying a sunny afternoon with your family, this table brings people together like no other.

One of the standout features is the tabletop itself—crafted from simple 2x6 boards, it forms a stunning geometric pattern that’s not only strong and durable but also beautiful to look at. It’s the kind of design that makes people say “Wow, did you really build that?”

Another big bonus? No chairs required. The built-in bench seating means you don’t need to worry about buying or storing extra outdoor furniture. Everything is connected in one solid, efficient design that maximizes seating space without crowding your yard.

This DIY octagon picnic table is designed with beginner-friendly cuts, affordable materials, and step-by-step instructions that guide you every step of the way. It’s a rewarding weekend project that results in a sturdy, long-lasting piece of outdoor furniture you'll be proud to show off for years to come.

 

 Estimated Build Cost for this Picnic Table (US)

Item Quantity Estimated Cost
2x6 @ 8 feet (for seats, top) 10 boards $60 – $90
2x4 @ 8 feet (support framing) 6 boards $25 – $40
3" exterior screws 1 box $10 – $15
Wood glue (optional) 1 bottle $5
Exterior wood stain or paint 1 quart $10 – $20
Sandpaper or sanding discs Few sheets/discs $5 – $10

Total Estimated Cost: $115 – $180

 

More Free Picnic Table Plans

In all shapes and sizes, we have lots more picnic table plans - including an 8 seat with open design!  

 

20 free picnic table plans

 

Free Plans to Build Your Own Octagon Picnic Table

Thank you for using our free plans.  Please send in a photo if you build, we love seeing results!

Dimensions
diagram showing dimensions of picnic table
Dimensions are shown above. This table is LARGE. And it will be heavy.

Preparation

Shopping List
  • 10 - 2x4 @ 8 feet long
  • 15 - 2x6 @ 8 feet long
  • 2-1/2" to 3" long self tapping star bit exterior screws (About 200)
  • Medium grit sandpaper
  • Exterior finish suitable for fences
 
Common Materials
2 1/2 inch screws
120 grit sandpaper
primer
wood conditioner
paint
paint brush
Cut List

UPDATE: One of our readers built this table and felt it could use a little more leg room. He suggested extending out the seat 2x4 boards (marked by *) by 4" all the way around, and removing the inner seat board and adding a seat board to the outside to increase leg room - the seat boards marked with ** should be measured and cut as you go.

It is recommended that you cut as you go, as boards can vary in width - especially the tabletop and seat boards.

 

Table Framing

  • 1 - 2x4 @ 62" (Longest Point - Both ends tapered back at 30 degrees off square, NOT parallel to each other)
  • 2 - 2x4 @ 30 1/2" (Longest Point - One end at 30 degrees off square)
  • 4 - 2x4 @ 29 15/16" (Longest Point - One end at 30 degrees off square, other end at a point, 45 degrees off square)

Tabletop Boards

  • 8 - 2x6 @ 4 9/16" (Longest Point - Both ends at 22 1/2 degrees off square)
  • 8 - 2x6 @ 9 1/2" (Longest Point - Both ends at 22 1/2 degrees off square)
  • 8 - 2x6 @ 14 7/16" (Longest Point - Both ends at 22 1/2 degrees off square)
  • 8 - 2x6 @ 19 5/16" (Longest Point - Both ends at 22 1/2 degrees off square)
  • 8 - 2x6 @ 24 1/4" (Longest Point - Both ends at 22 1/2 degrees off square)
  • 8 - 2x6 @ 32 15/16" (Both ends at 30 degrees off square, parallel to each other)

Seat Framing

  • 1 - 2x4 @ 95" (Longest Point - Both ends tapered in at 30 degrees off square)*
  • 2 - 2x4 @ 46 3/4" (Longest Point - One end at 30 degrees off square)*
  • 4 - 2x4 @ 46 7/16" (Longest Point - One end at 30 degrees off square, other end at a point, 45 degrees off square)*

Seat Boards

  • 8 - 2x6 @ 31 13/16" (Longest Point - Both ends at 22 1/2 degrees off square)**
  • 8 - 2x6 @ 36 3/4" (Both ends at 30 degrees off square, parallel to each other)**

 

NOTE: 2x6 are seat boards and tabletop boards, 2x4 are internal framing boards

Cutting Instructions

As you cut your boards, make every effort to reuse angled cuts when possible to minimize waste. Try when possible to cut the longest cuts first. You may need more or less boards depending on how you lay your cuts out.

Tools
Tape Measure
Speed Square
Pencil
Hammer
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Miter Saw
Power Sander
Level
Drill Bit Set
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

I wanted to add a diagram so that you can take measurements of the leg room.

Step 2

It starts with a big X. Be sure you are working on a very flat, level surface. Use pocket hole screws and glue to joint in the center as shown above. You could also use metal straps or plates but you can only place the metal plates on the bottom side.

Step 3

You will then need to carefully cut the remaining supports as shown above (click for a larger view) and add, with 22 1/2 degree angles between the "spokes". Pocket holes or metal brackets.

Step 4

Layout all of the tabletop boards first and adjust as necessary. The tabletop boards should meet in the center of the "spokes". Screw down, two screws per board, predrilled.

Step 5

Step 6

Mark all of your legs as shown above. Start by adding the longest remaining support as shown above. TIP: For added strength, rotate the full length support to 90 degrees from the full length tabletop support. This is shown incorrectly above.

Step 7

Then add the two supports cut straight on one end as shown above.

Step 8

As you did the tabletop, add the remaining lower supports.

Step 9

Flip the table back over and screw down the seat boards as shown above.  This time, start to the outside and work your way inward.

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Finish Used
Use a finish recommended for fencing.

Comments

deanna_g

Tue, 03/15/2011 - 06:44

So I'm trying to figure out whether to make the hexagon or octagon tables. The way I figure, at almost 41" long seats on the hexagon table, I can probably fit 1-2 adults per "seat". With the octagon, at almost 37", maybe one adult on each seat and one on each corner? 

It's hard for me to say without actually setting out a template. What do you think, Ana?

Rachelle (not verified)

Tue, 03/15/2011 - 06:57

Thanks so much for this plan.  I was also rooting for the larger table.  When there are already 5 people living at your house and you invite someone over, it's nice to be able to seat more than 6. 

Marley and Me

Mon, 05/02/2011 - 17:21

Not two weeks before this plan posted, my friend commented that she REALLY wanted a "round" picnic table, but that all the octagonal tables she saw were priced from $400 ~ $800. My reply was that we should build one. Then, this plan popped up on my Facebook page. Talk about good timing!

We had absolutely no trouble following this plan. However, in the very last cut on the list, 8 - 2x6 @ 36 3/4" (Both ends at 30 degrees off square, parallel to each other) are called for. We found that this angle didn't line up with the angle for the cut listed above it. For us, both boards had to be cut at 22 1/2. (And, the angles should be NOT parallel). Is anyone else having the same issue? Thanks in advance!

Jeremy Hill (not verified)

Tue, 05/08/2012 - 16:42

After looking into your problem, I agree. The 36 3/4" boards for the outer layer of the seat should have angles of 22 1/2" on each end NOT parallel. Good catch. That will save me some wood and a little headache when I make mine. Thanks

Zee (not verified)

Fri, 05/06/2011 - 05:07

I want to build this table for my daughters American Girl Dolls, 16" in height, any idea's on what "size" of person this table would be considered average for? or what % reduction i'd need to apply for use with 16" dolls?

Thanks.

Ladybrinx (not verified)

Fri, 06/10/2011 - 14:56

I want to build one of these too! Love the table, thanks for the plans.. I too would like to build one American girl size...that would be AWESOME!

Guest (not verified)

Thu, 10/27/2011 - 14:50

Any ideas how to add an umbrella without compromising the strength of this?

Guest (not verified)

Thu, 03/29/2012 - 09:02

In step 6 whys is the support on one side of the table set at 15 inches from the bottom of the leg and the other is set at 13 inches from the bottom of the leg? Is that correct?

Guest (not verified)

Thu, 03/29/2012 - 17:47

The 15 inch is the measurement of the angle up to the bottom of the leg and the 13 inch is straight up from the support to the bottom of the leg

Guest (not verified)

Tue, 04/10/2012 - 16:55

To get more leg room an option would be to overhang the outer seat board 2x6 by 1 inch and use a 2x4 for the inner seat board. you would gain 3 inches or more depending on how much you overhang the outer 2x6.

Jeremy Hill (not verified)

Tue, 05/08/2012 - 16:47

I don't have a Kreg jig. Don't really want to buy one either. Is there another way to join the cross members with out having to buy the Kreg jig? Thanks

Kurt (not verified)

Wed, 07/11/2012 - 04:54

You can do what I did...I was in the same position and did not have a Kreg Jig.
I used a square piece of plywood (if you're feeling ambitious, you can cut it into a circle which may actually work better) and attach the cross members to it. Make sure it's not too big so you have room for the legs and put it on the underside of the table though.

jcavuotisr (not verified)

Wed, 07/04/2012 - 14:28

I noticed someone else asked this question but no replies yet... I want to include a 2" center hole for a large "sidewalk cafe" type umbrella. Can this modification be incorporated in the plans??

Thanks you.

Mrbuildit (not verified)

Sun, 07/22/2012 - 12:00

As a carpenter that loves his job and takes too much pride in his work i feel it is necessary to point out that yes you can level the legs by putting a level on the 30 degree cut, however that will only work if the table top is leveled out or on a level surface. Otherwise the legs will read level to the slope of where ever you build the table but when you move it they will be on a different slope and thus out of level. My advice build the top and level it with scrap wood and or whatever you have lying around. If you cant do that then build it as close to its final destination as you possibly can.

Kandis (not verified)

Tue, 08/07/2012 - 11:41

I love this table and we have regular BBQs at my house that would make this table a staple in our backyard. However I live in west Texas where we have 100+ degree days for about 4-6 months of the year. Is there a way to adjust this so that you can add an umbrella over the top for shade?

James (not verified)

Thu, 09/06/2012 - 08:24

To make the table accept an umbrella, what I would do is make a plywood donut and use that to attach the table top supports to. Would be a plywood circle with a hole in the center big enough to fit the umbrella pole. Then you could cut a hole in the tabletop and let the umbrella pole rest on the bottom cross braces. I don't think this would lose much strength since you have the tabletop slats holding things together also.

JF Woodcraft

Fri, 03/29/2013 - 12:46

I first built this style of table about 27 years ago and have built at least one hundred since then. There are a couple of things about the plan as shown that can be changed. First of all, every second leg should be set back about ten inches. In other words, they should be staggered. This makes it easier to get in and out of the table. The table top can be made of 5/4 x 6" deck boards. This will reduce the weight of the table by almost half. Use 2" x 6" for the seats only. The pieces to form the rings can be laid out on the frame and clamped with ratchet straps in order to attach each ring to the frame. Joints should be glued with an industrial type adhesive such as Gorilla Premium Glue. This glue is 100% water proof and will not break down in the heat or cold. To make the frame stronger and allow a hole to be drilled for an umbrella, without creating a weak spot in the table, install a 3/4" thick plywood disc (14" dia. ) on the bottom of the top frame. Also add two additional plywood discs on the top and bottom of the lower frame. Be sure not to place any nails or screws in the pathway of where the hole will be drilled for the umbrella hole. This table should be stored at an angle during the winter so water can not form in to ice in the joints and force them apart.

christyinla

Tue, 05/13/2014 - 07:18

Hi and thanks for the plans for this table! This is the first project I have attempted, just getting started but table came out perfect! I am now attempting a kids version for my grandkids and have reduced the table top to 36". I am stuck at the leg supports. I know I want the seats 10" off the ground and the table top 20" off the ground but I haven't figured out how long to cut the leg supports with the angle to make sure the table lands at 20". Any help anyone can give me would be most appreciated! Thanks!

camgauthier

Sat, 05/09/2020 - 12:46

Hello All
Just trying to figure out a step with my Kreg Jig that not too sure about. In steo 3 and 8 you will connect the pointed 45 degree angle braces to the center brace using PH but how would you attach to Kreg jig in order to make the PH. Aftere connecting to make the X I am seeing integrity issues for strength and with 16 screws going into the same area not sure if this would be wise.

If someone can give me a tip on this that would be greatly appreciated

Seasonal And Holiday

Frequently Asked Questions

Wood Questions

What kind of wood should I use?
Most of our plans use standard construction lumber like pine or fir. It's affordable, easy to work with, and easy to find. It's also rapidly renewing and biodegradable, so a great eco friendly choice!

Can I use hardwoods instead?
Yes—just keep in mind they're heavier, cost more, and can be tougher on tools and harder to join together and finish. I recommend not tackling a hardwood project until after you have built several softwood projects.

What if my boards are warped?
Choose the straightest boards at the store. You can often work around slight warps by cutting them into shorter pieces.

What wood should I use for outdoor furniture?
Use red-toned or pressure-treated 2x lumber for framing, and cedar or cedar fence pickets for the decking. Outdoor furniture should be built like a deck—your local home center can help recommend the right wood for your climate.

Will my wood move or warp after I build?
Potentially, especially in humid climates. Let your wood acclimate indoors before building. Once acclimated and kept in a stable environment, movement should be minimal. Remember, most houses are built using framing lumber - it's all about keeping moisture down indoors.

Cutting Questions

Do I need a miter saw?
A miter saw is great, creating fast, safe, and precise cuts, even for beginners. But most plans can be built with a circular saw and a straight edge. If using a circular saw to cut, take time to practice, and get good at making cuts, before cutting your project boards.

How do I get clean cuts with a circular saw?
Clamp your board, measure twice, cut slow, and use a sharp blade. This takes practice, so spend some time making cuts. I go through becoming proficient at freehand cutting in my course, it is worth taking if you want to master this skill.

Will the store cut my wood?
Yes—most stores will do rough cuts to help you transport your materials home. But from store to store, the quality of cuts could greatly vary.

Joinery Questions

What screws should I use?
We recommend star-head self tapping screws for framing, most common sizes are 2-1/2", 1-3/4". Pre-drill if close to the edge or you find your wood is splitting.

Do I have to use pocket holes?
Pocket holes are the cheapest, easiest and fastest way to do some joints - like edge to edge or a hidden fastener joint. There are other methods, but these can be time consuming and expensive. We recommend using pocket holes as indicated in plans for best results.

How do I keep things square?
Use a speed square and measure diagonals after each step. Always clamp joints before screwing to keep them tight and flush.

Finishing Questions

Stain or paint before or after building?
A quick sand before and a full finish after gives the best results. Pre-finish if you're doing two-tone or detailed finishes.

What type of finish?
Use oil-based or water-based stain. For paint, cabinet-grade latex or enamel works great. High use surfaces on indoor projects should get a coat of polyurethane, I recommend a Helsman or Spar or other flexible poly that won't crack or peel with wood movement. For exterior projects, use a finish suitable for exterior fences.

How to get a smooth finish?
Start with a well sanded project. Sand between coats (220 grit), wipe clean, and apply light coats with a foam brush or roller.

Plan Questions

Can I change the size?
Many people do, and that's the great thing about building your own furniture! But do keep in mind going bigger might mean more supports are required, and often plans are optimized for minimal material waste.

Are these beginner-friendly?
Yes—plans are written with simple tools and clear steps in mind, with every effort to make plans as simple as possible.

Can I sell what I build?
Absolutely! Just don’t resell or repost the plans themselves.

General Questions

What tools do I really need?
A drill, circular saw, tape measure, square, and a few clamps will get you through most projects.

Do I need a workshop?
Nope! A driveway or small patio is plenty to get started, just make sure you have a level place to work. If you find you are building several projects a year, creating a small workbench is a great way to store tools and have a dedicated workspace.

What if I mess up?
Wood filler, sanding, or flipping boards goes a long way. Mistakes are part of the process!

What can I do to make my projects look more professional?
Start with straight boards, make accurate cuts, clamp all joints, and line up everything neatly. Sand thoroughly, use a neutral finish, and apply it in light coats for a clean look.

I've never built anything before. Where should I start?
Start with a few smaller softwood projects to get hands-on experience. Or if you're tackling a big project, buy a little extra lumber and practice your cuts and joints first. If possible, work with someone who has a bit of experience.

Care & Maintenance

How long will my furniture last?
With good joinery and regular care, your DIY furniture can last for decades. I have pieces in my own home that are over 20 years old and still going strong! One of the best parts about DIY furniture is that it’s easy to repaint, refinish, or repair—so your projects can grow and adapt with you.

How should I care for outdoor furniture?
Lightly pressure wash or hose it down once or twice a year. Tighten screws and reapply finish as needed to protect it—just like a deck or fence. A little upkeep goes a long way in extending the life of your furniture.

How about indoor furniture?
Regularly dust or wipe with a damp cloth. If it starts to look worn, a light sanding and touch-up paint or stain can refresh it in no time. DIY pieces are meant to be durable and fixable—so don’t be afraid to give them some love now and then.

Want to Build with Confidence?

Check out my ebook: 12 Skills to Build Your Own Furniture
It walks you through the core skills every builder needs—measuring, cutting, joinery, and finishing—so you can build beautiful furniture that lasts.

Still Have Questions?

Email us anytime at [email protected] and we’ll be happy to help!