My take on the toy box

Submitted by Patrick on Sat, 04/07/2012 - 13:30

I chose to go with regular plywood, and I used thin pieces of wood to cover the screw holes in the corners. I just rounded the edges of the corner pieces to make them meet up with the molding better. Then I routered the top to smooth it out. I stained and clear coated it instead of painting it. For the lettering I chose to router it out instead of drawing it on.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Plywood, pine molding, pine 1x6 and 1x2 and 1/2x2
Finish Used
minwax gunstock and spray on clear coat
Recommended Skill Level


Free Plans Made Possible By Our Sponsors