Charlie's Personalized Highchair

A few days before Thanksgiving, my mom told me she wished we had a restaurant style high chair for my daughter. The old one was so large and bulky, and was hard to reach food on the table. I knew just where to look for plans! I spent $6 on the lumber and used scraps for the seat and back. The chair is painted in three coats of lime green paint. We used my mom's Cricut to cut the vinyl letters and stuck them on the back. Then three coats of polyurethane for easy wiping and it was ready for straps! I picked up $3 worth of 1" webbing from Hobby Lobby along with a parachute snap clip. I used two small cabinet screws for each strap on the bottom to attach. I decided to loop the front strap over the 1x2 front bar to prevent any risk of splitting by drilling into that thin side. Instead both ends are screwed down on the bottom.

We absolutely love this new highchair! It perfectly fits under the table and Charlie has no trouble eating (and throwing) food now. And for $10, you just can't beat it! Solid wood, perfect color, personalized name. I really love DIY

Built from Plan(s)
Estimated Cost
$10
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
three coats of lime green latex paint, followed by three coats of polyurethane
Recommended Skill Level
Intermediate

Comments