Benchwright Table

My wife loved the Benchwright table at pottery barn, and I did not love the price. Got a lot of ideas from this site and tried to make it my own. The outside and legs are made from 5"x5" Cypress, purchased from a local saw mill. I used a kreg jig on the entire thing along with lag bolts and glue. It is very heavy and I can jump up and down on it. Bought the hardware from Fastenal. Fun project, took about 16 hours total.

Estimated Cost
$400
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Poly - 3 Coats
Recommended Skill Level
Advanced

Comments

jbayer80

Sat, 03/02/2013 - 20:21

This is by far my favorite table I've seen on here. Wow...its all I can say. I wish it was not in the $400 range.

BTW, that is some serious saw dust. haha

In reply to by jbayer80

chasekirby80

Sun, 03/03/2013 - 05:50

Thank you,
I helped a buddy make on shortly after I made mine. He used 4x4 pine, it looks a little smaller and the pine did not stain as dark, but it is still a very nice looking table. He made it for under $150, so that might be a good option.

jbayer80

Sun, 03/03/2013 - 07:37

That is a great option. Hopefully when its time for a table like this I can afford the 5X5's.

What a statement that table has!