This easy to build bench makes a statement! We love how it drains water and is very sturdy. Free plans to build a modern slatted bench for your outdoor space include step by step diagrams and shopping lists.
9 - 2x4 @ of feet long or stud length
3 - 1x4 @ 8 feet long
2" self tapping wood screws or finish nails
Optional 1 1/4" and 2 1/2" PH screws if desired
7 - 2x4 @ 72"
14 - 2x4 @ 14 1/2"
12 - 1x4 @ 18"
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
TIP: Unless you are spray painting, it may be difficult to paint between slats. You may wish to paint or stain all of your 2x4 @ 72" long first. Leg boards you will not have this issue.
Choose your best looking 2x4 top board and leg boards. Set them best looking side down on the table. We'll be working from the front backwards.
Lay out 1 long 2x4 and 2 short 2x4s. Position the 1x4 on top, apply glue and nail or screw down, to both the top and leg 2x4s.
Add a layer of 2x4s on top of the 1x4s.
Next, repeat with a layer of 1x4s, nailing or screwing into both the top and leg 2x4s.
Continue until you run out of boards :)
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.