Emersen nightstand - First Build

Submitted by Feolet on Thu, 01/29/2015 - 18:58

I used reclaimed fence wood instead of plywood.  Just put together three planks to make the side/top/bottom pieces.  I adjusted the size a bit since I had limited space for it to fit into.  This was my first ever furniture project and my first use of my new kreg jig.  

Built from Plan(s)
Estimated Cost
Less than $20 (not counting some tools I bought that I'll use from now on). The fence wood I used was free, so I just needed to buy the 1/4 plywood for the back and bottom of the drawer, the screws, and the handle. I had the green paint, and the polyurethane spray.
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
reclaimed fence wood, 1/4 inch plywood
Finish Used
Polyurethane spray
Recommended Skill Level