The perfect spot for a part time sewing enthusiast! Tucks neatly way, expands out to be a cutting or layout mat. Please note that this table is not intended for use with the sewing machine unless locking hardware is installed on the fold out legs and tabletop.
If your sewing takes over your dining table at least half the time, make sure you thank Kelly on our Community for recommending an expandable sewing table.
I love this idea because there is a tidy spot to hold your sewing machine, a shelf for baskets and other sewing things that you need to keep handy, tons of tabletop space, but it all folds up into a neat little package that you can roll into a closet.
1 – Sheet of Plywood or MDF
2 – 1x2s or 1x3s
4 – 2″ Caster Wheels (Overall clearance of 2 1/2″)
5 – Sets of hinges
2 1/2″ Screws
1 – 1×32 @ 15 1/2″ (Top)
2 – 1×32 @ 26 3/4″ (Sides)
2 – 1×32 @ 12″ (Shelves)
2 – - 1×32″ @ 20″ (Leaves)
4 – 1x2s @ 29 1/4″ (Legs – Measure these!)
If you can, take this diagram to Blue or Orange and have them make your cuts. If you are cutting this yourself, start by cutting the plywood into 31 7/8″ widths (shown above as 32″), 48″ long. Then from those three pieces, cut out the remaining pieces. Remember, always consider the width of your saw blade as you cut.
Now this is important – your wheels need to have a total clearance of 2 1/2″. If you wheels do not have a total clearance of 2 1/2″, DO NOT cut the legs just yet. Instead, add the wheels, then take a measurement from the bottom of the wheels to the underside of the tabletop. This will be your new leg length.
We apologize if there was an error in this plan. Please help us out and report any errors here.