Brandy Scrap Wood Storage Bed with Drawers - QUEEN

reclaimed wood storage bed plans
Difficulty
Intermediate
| Print this plan

DIY Storage bed with drawers, covered in scrap wood pieces.  You can use pallet wood or any scrap wood, or use regular drawer faces for a more refined finish.

This plan is also available in a King version.

 

pallet wood storage bed
storage bed with drawers scrap wood plans
drawers open on reclaimed wood bed
reclaimed wood storage bed with drawers

Boy oh boy do I ever have a treat for you today!!!

It's been terrible keeping this one for you - but I really wanted to share this project during March, while we have the #GetBuilding2015 #ScrapWorkLove social media share and inspire contest going on!

Here's a project that might just make you save every single little scrap piece of wood!

This amazing bed was actually built by my friend Brandy.  

Brandy had some time off from work this winter, and asked me to help her build a storage bed with drawers.

So I drew up a really simple plan, with just plywood boxes covered in wood face frames and trim. 

 

But when it came time to cover up that plywood and those drawer faces, Brandy and I came up with the idea of using scrap wood, kinda like "siding" on the bed.

Brandy took scrap wood frm my scrap wood bin and fit them together on the side panels.  I love how she used different depths and types of wood - just whatever was there, and whatever could fit.

Once all the pieces were fit in place, she then glued each piece,

And then nailed the pieces on to the side panels of the bed.

This was the first panel Brandy did.  We both LOVED it so much, we decided to do the drawers too!

After coating the ENTIRE bed with a coat of light stain (try Rustoleum Golden Oak), Brandy when over select pieces with a slightly darker stain (try Rustoleum Early American or Light Walnut), and then a few more in an even darker stain (try Rustoleum Dark Walnut or Kona).  

Isn't it breathtaking?

I actually asked Brandy if she would sell her bed to me.  I sure did.  

It is that crazy beautiful.  I was having a hard time parting with it.

Even the little children running around the house playing while we were photographing the bed all came over to admire it. They ooohed and ahed, even as young as five years old, able to appreciate how beautiful this bed is!

 

And while Brandy wouldn't sell this bed to me, I am quite honored that she let me help her build it and I got to be part of such an amazing piece.  

Scrap wood.  Who would have thought?

 

The plans follow (if this is the homepage, click READ MORE below). We can't wait to see how you make your bed, so please share if you build!

XO Ana

 

Pin For Later!

Brandy Scrap Wood Storage Bed with Drawers - QUEEN

Dimensions
queen storage bed plans
Queen sized dimensions shown above

Preparation

Shopping List

You will need to add pallet or scrap wood for the "siding" - drawer faces can also be 1x12s

  • 2 full sheets of 3/4" plywood ripped into strips
  • 15-3/4" wide (very important that all rips are the exact same width)
  • 1 full sheet of 1/4" plywood (rip into strips 15-3/4" wide for drawer bottoms)
  • 11 - 1x4 @ 8 feet long
  • 4 - 1x3 @ 8 feet long (for slats)
  • 4 - 1x2 @ 8 feet long
  • 2 - 1x8 @ 8 feet long (for drawer boxes)*
  • 3 - 1x8 @ 10 feet long (for drawer boxes)*
  • 6 - 16" Euro Drawer Slides (the white bottom corner mount ones)
  • 6 knobs or handles

*Drawer boxes could also be made of plywood ripped into strips 7-3/4" wide (1/2" or 3/4") (could save money and would be more structurally sound and square than pine boards

Common Materials
3/4 inch finish nails
1 1/4 inch finish nails
120 grit sandpaper
Cut List

END BENCH (for building 1 bench)

  • 1 - 3/4" plywood @ 15-3/4" x 58-1/2""
  • 3 - 3/4" plywood @ 15-3/4" x 15-3/4"
  • 4 - 1x4 @ 28-1/8"
  • 2 - 1x2 @ 16-1/2"
  • 1 - 1x2 @ 57"
  • 1 - 1x4 @ 57"

 

End Bench Drawers - Cut to fit opening and drawer slides

  • 4 - 1x8 @ 15-3/4"
  • 4 - 1x8 @ 25-5/8"
  • 2 - 1/4" plywood @ 15-3/4" x 27-1/8"

 

SIDE BENCHES (for building 2 benches)

  • 2 - 3/4" plywood @ 15-3/4" x 62-1/2""
  • 6 - 3/4" plywood @ 15-3/4" x 15-3/4"
  • 8 - 1x4 @ 30-1/8"
  • 4 - 1x2 @ 16-1/2"
  • 2 - 1x2 @ 61"
  • 2 - 1x4 @ 61"

 

Side Bench Drawers - Cut to fit opening and drawer slides

  • 8 - 1x8 @ 15-3/4"
  • 8 - 1x8 @ 27-5/8"
  • 4 - 1/4" plywood @ 15-3/4" x 29-1/8"

 

TIE-IN PIECES

  • 4 - 1x4s or 1x3s @ 58-1/2"
  • 2 - 1x4s or 1x3s @ 62-1/2"
  • 12 - 1x3s @ 26-1/2" (can be any scrap wood or plywood)
Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Miter Saw
Table Saw
Brad Nailer
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

END BENCH (BUILD ONE) - Attach the side panels and middle panel to the top plywood piece. Make sure that center piece is exactly centered (we used the 1x4 pieces from the next step as guides). Attach with pocket holes. We also drilled 3/4" pocket holes facing forward on the end panels (outside) and top panel (on top) for attach the face frame in later steps. Remember that the entire bed gets "sided" so place pocket holes on the outsides.

Step 2

END BENCH (BUILD ONE) - Tie in the bottoms of the bench with 1x4s. Keep pocket holes on outside for easy attaching and more strength.

Step 3

END BENCH (BUILD ONE) - Build the face frame separately, then attach the completed face frame to the bench. Insides will be flush on the sides, top will be flush to top, bottom 1x4 boards will match up. Use the pocket holes you drilled in earlier steps to attach at the top and sides. Nail to the bottom 1x4 board with 1-1/4" nails and glue.

Step 4

END BENCH (BUILD ONE) - Cover the end panel of the bench in wood boards. We used scrap wood but any wood can be used here. Nail and glue on.

Step 5

Step 6

Tie in the two side benches with 1x4s or 1x3s (we actually used scrap strips of plywood - anything will work here, these boards are just to keep the two benches lined up. We actually did this in the room after finishing the entire bed in the garage and then carrying all the pieces into the room for final assembly.

Step 7

The slats will rest on top of boards tied into the backs of the side benches. Consult your mattress for recommendation on slat spacing. We actually burned up lots of random sized scraps for the slat system.

Step 8

There's alot of drawers, so this is where much of the time and money was spent. We also built our drawers out of 1x10s so the front face would be easy to nail scraps too but that is an added cost. The measurements given are for the perfect build - make sure you measure each and every opening, and build to fit your drawer slides and openings. I actually number each drawer box and custom make to fit each opening.

I build drawers by placing 3/4" pocket holes on outsides of front and back and attach with 1-1/4" pocket hole screws. The pocket holes then get covered up by the drawer face.

Step 9

Install drawers inset 3/4" from face frame (or flush with front edge of plywood).  To make installing drawers easier, I cut a spacer block and rest the drawer slides on top -

That way I knew all my drawer slides were installed at the same height, and it took alot of measuring and marking out of the build process.

Step 10

Finally, attach drawer faces to drawer boxes. The drawer slides will have some play, so make sure you attach with the drawer sitting upright (as pictured in the diagram). The openings are sized for 1x12s if you wanted to go that route. Leave about 1/8" gap around all sides of the drawers.

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

Comments

Tsu Dho Nimh

Wed, 03/11/2015 - 13:34

If you are doing a "scrappy" project like this, stain a bunch of boards first in various colors, then apply them.

It's way easier than staining later, trying to be tidy.

Lost Upon A Time

Thu, 03/12/2015 - 07:34

This is beautiful! I may have to change all my bedroom plans now. :) The ruggedness of the bed contrasts the lovely bedding beautifully. This is a versatile piece. Well done!

largemouth

Thu, 03/12/2015 - 07:57

First I love the idea behind this using the scrap and then the different stain colors.

My first question concerns the connection of the End Bench and the Side Benches...how do you connect these? You mentioned they are built then carried seperatly to the room and put in place but do you attach them at all and if so where or how?

Last Question: Do you happen to have any measurments or help for doing this bed in King size?

Thanks for all you do!

Ana White

Thu, 03/12/2015 - 09:21

Hi, thank you! You can easily attach the end bench to the side benches with a few couple of screws from the side benches into the back of the end bench, but we found it wasn't necessary - once the bed was on top, it wasn't going anywhere (but Brandy has carpet too).

For a king, it depends on the type of king. For a standard king (76 wide x 80 deep) only the end bench needs to be modified (since both a queen and standard king are 80" deep). Simply make the end bench 16"longer than the queen. Drawers will be 8" wider than the queen which is reaching max span for drawers so make sure you use a more substantial bottom on those drawers.

If there's enough interest, I would be happy to put together king plans for you.

Thanks so much for reading! Ana

Keri.mcgehee

Tue, 06/21/2016 - 16:30

I would love to get the measurements for a king! This is really awesome.I have never done any wood work and would love to give this a try!

thedoad

Wed, 03/18/2015 - 14:20

Awesome plans! I second the request for a King version! Great job as always!

Shyam Sundar Naik

Tue, 04/14/2015 - 03:29

My heartiest thanks to both Ana and Brandy for sharing their ideas in building a storage bed using various scraps.
Can I know as to how the cut will be dissembled and if it is possible at which points/portions?. I am planing to build one bed cut according to this plan. But, in my case, being government{transferable job) servant, I am supposed to be transferred to different places for which I need to relocate my all furniture accordingly. I solicit your help in this regard.

TaylorCrawford

Wed, 07/22/2015 - 07:10

Hi! I love this bed idea and my fiancé and I are in the process of buying a house and we want to build this bed but we are buying a king size bed! Is there any way you could email me the measurements and info on how to do this in a king size? Thank you!! 

lindsee

Sun, 08/23/2015 - 09:43

Would love plans for a twin and king size plans for this bed. Could you please post or email to me. Want to build for my son. Thank you

llangan

Mon, 03/14/2016 - 08:20

Is there a step by step for the drawer slides?  Are these on the bottom of the drawers or the sides?  

I can't wait to start this project! 

iyhyari

Fri, 04/15/2016 - 01:22

This is great, is there any way of getting a full size plan. I would love to do this for my sons room!!

reikidancer

Fri, 09/30/2016 - 06:08

Hi Anna,

I love your plans! Do you have plans for a full size version of this bed? Also, if I wanted to raise it up off the floor a little, to provide essentially a "toe kick" (yes, I stub my toes a lot on furniture), would I modify the plans to have plywood bottoms and then just add scrap wood "feet" to give me a few inched of toe "relief"?

Thanks,

Lisa

CruiseB

Mon, 12/19/2016 - 16:14

Do you need a box springs with this, or does the mattress go right on top of the frame?

daryl.woerz

Wed, 03/22/2017 - 05:22

I am new to woodworking and really like your simple and straightforward plans.  I am working on the Brandy scrap wood bed and just want to be sure I do it right.  Could you  tell me how are the drawer bottoms to be attached?  Thanks and keep up the good work.

meustice

Wed, 08/21/2019 - 14:31

Wondering what would be the simplest way to convert these plans to a full size? Thank you and it is very beautiful.

Frequently Asked Questions

Wood Questions

What kind of wood should I use?
Most of our plans use standard construction lumber like pine or fir. It's affordable, easy to work with, and easy to find. It's also rapidly renewing and biodegradable, so a great eco friendly choice!

Can I use hardwoods instead?
Yes—just keep in mind they're heavier, cost more, and can be tougher on tools and harder to join together and finish. I recommend not tackling a hardwood project until after you have built several softwood projects.

What if my boards are warped?
Choose the straightest boards at the store. You can often work around slight warps by cutting them into shorter pieces.

What wood should I use for outdoor furniture?
Use red-toned or pressure-treated 2x lumber for framing, and cedar or cedar fence pickets for the decking. Outdoor furniture should be built like a deck—your local home center can help recommend the right wood for your climate.

Will my wood move or warp after I build?
Potentially, especially in humid climates. Let your wood acclimate indoors before building. Once acclimated and kept in a stable environment, movement should be minimal. Remember, most houses are built using framing lumber - it's all about keeping moisture down indoors.

Cutting Questions

Do I need a miter saw?
A miter saw is great, creating fast, safe, and precise cuts, even for beginners. But most plans can be built with a circular saw and a straight edge. If using a circular saw to cut, take time to practice, and get good at making cuts, before cutting your project boards.

How do I get clean cuts with a circular saw?
Clamp your board, measure twice, cut slow, and use a sharp blade. This takes practice, so spend some time making cuts. I go through becoming proficient at freehand cutting in my course, it is worth taking if you want to master this skill.

Will the store cut my wood?
Yes—most stores will do rough cuts to help you transport your materials home. But from store to store, the quality of cuts could greatly vary.

Joinery Questions

What screws should I use?
We recommend star-head self tapping screws for framing, most common sizes are 2-1/2", 1-3/4". Pre-drill if close to the edge or you find your wood is splitting.

Do I have to use pocket holes?
Pocket holes are the cheapest, easiest and fastest way to do some joints - like edge to edge or a hidden fastener joint. There are other methods, but these can be time consuming and expensive. We recommend using pocket holes as indicated in plans for best results.

How do I keep things square?
Use a speed square and measure diagonals after each step. Always clamp joints before screwing to keep them tight and flush.

Finishing Questions

Stain or paint before or after building?
A quick sand before and a full finish after gives the best results. Pre-finish if you're doing two-tone or detailed finishes.

What type of finish?
Use oil-based or water-based stain. For paint, cabinet-grade latex or enamel works great. High use surfaces on indoor projects should get a coat of polyurethane, I recommend a Helsman or Spar or other flexible poly that won't crack or peel with wood movement. For exterior projects, use a finish suitable for exterior fences.

How to get a smooth finish?
Start with a well sanded project. Sand between coats (220 grit), wipe clean, and apply light coats with a foam brush or roller.

Plan Questions

Can I change the size?
Many people do, and that's the great thing about building your own furniture! But do keep in mind going bigger might mean more supports are required, and often plans are optimized for minimal material waste.

Are these beginner-friendly?
Yes—plans are written with simple tools and clear steps in mind, with every effort to make plans as simple as possible.

Can I sell what I build?
Absolutely! Just don’t resell or repost the plans themselves.

General Questions

What tools do I really need?
A drill, circular saw, tape measure, square, and a few clamps will get you through most projects.

Do I need a workshop?
Nope! A driveway or small patio is plenty to get started, just make sure you have a level place to work. If you find you are building several projects a year, creating a small workbench is a great way to store tools and have a dedicated workspace.

What if I mess up?
Wood filler, sanding, or flipping boards goes a long way. Mistakes are part of the process!

What can I do to make my projects look more professional?
Start with straight boards, make accurate cuts, clamp all joints, and line up everything neatly. Sand thoroughly, use a neutral finish, and apply it in light coats for a clean look.

I've never built anything before. Where should I start?
Start with a few smaller softwood projects to get hands-on experience. Or if you're tackling a big project, buy a little extra lumber and practice your cuts and joints first. If possible, work with someone who has a bit of experience.

Care & Maintenance

How long will my furniture last?
With good joinery and regular care, your DIY furniture can last for decades. I have pieces in my own home that are over 20 years old and still going strong! One of the best parts about DIY furniture is that it’s easy to repaint, refinish, or repair—so your projects can grow and adapt with you.

How should I care for outdoor furniture?
Lightly pressure wash or hose it down once or twice a year. Tighten screws and reapply finish as needed to protect it—just like a deck or fence. A little upkeep goes a long way in extending the life of your furniture.

How about indoor furniture?
Regularly dust or wipe with a damp cloth. If it starts to look worn, a light sanding and touch-up paint or stain can refresh it in no time. DIY pieces are meant to be durable and fixable—so don’t be afraid to give them some love now and then.

Want to Build with Confidence?

Check out my ebook: 12 Skills to Build Your Own Furniture
It walks you through the core skills every builder needs—measuring, cutting, joinery, and finishing—so you can build beautiful furniture that lasts.

Still Have Questions?

Email us anytime at [email protected] and we’ll be happy to help!