Pub style table

Submitted by old_man on Sun, 04/08/2012 - 10:54

This is more or less a bunch of designs put together to create a pub style table. It's made of 2X4s, 2X6s, and 4X4s. 42" height to accommodate 30" stools. 44"X44" table top.

Important things to note are that the top slates are screwed to the runners running underneath and the ends. They are not screwed to each other. This will allow them to shrink width wise with out casing problems. Only downside is that during the winter try air there will be tiny gaps in between each slat. Oh well. Also, put the entire table together before you measure/cut the two end pieces (2X6s) Turns out a 2X6 is not exactly 5.5", over 8 pieces that difference adds up.

I included an underside shot to show where the screws are and where the runners are. By putting wood at 90 degrees to each other you limit the chances of warping when using white wood but you have to consider how it will dry/shrink.

Oh, one last thing.....the table is bloody heavy.

Estimated Cost
$70 for table only
Estimated Time Investment
Day Project (6-9 Hours)
Type of Wood
white wood
Finish Used
Minwax dark walnut stain. Satin poly
Recommended Skill Level


Erinski3 (not verified)

Mon, 04/16/2012 - 17:37

Love the table, I think this would fit for my place. Since I'm a beginner at this, will you help me out with the sizes, etc. I am planning to have the pieces cut, as i dont own any machines. Did u use 2x4 or 2x6 for the top pieces? What about for the support pieces on the bottom? I see the legs are4x4 and the end pieces 2x6. Thanks!

Haley (not verified)

Mon, 07/16/2012 - 04:34

Could anyone give me the measurements to build this as a 4-seater? Love this table and I am in a small apartment...

khoos01 (not verified)

Tue, 01/15/2013 - 23:55

Are there plans for this particular table? I see plans for similar tables but not this one, and I really like this one!


Sat, 03/09/2013 - 09:01

In love with this table, and was wondering how I could get the plans for it.


Tue, 05/14/2013 - 21:26

I am absolutely in love with this table and it would look amazing in my new home. I was wondering if there was any way I could get the plans for it please?! Thank you!!


Tue, 06/11/2013 - 11:47

Looking for the plans for the pub style table posted by old_man. I really like the changes you made.


Sat, 07/20/2013 - 23:00

nice project idea! I plan on adapting this project using 3/4" hardwood flooring. I will probably modify the actual dimensions to suit my small kitchen area. maybe something like 30"x36" Will post photos when complete!


Thu, 07/23/2015 - 18:58

Did you make the serving table / wine rack in the background of the second picture? And if so can I get the plans for it? The two of them together look awesome!


Thu, 03/02/2017 - 08:55

Hey there Old man,

(or anyone else that can clarify).....44" high - is that counting the 4x4 leg length AND the 2x6 on top or JUST the 4x4?




Wed, 10/06/2021 - 20:36

Did anyone get plans for this table? She didnt respond to any comment.