Rainbow Poplar

Submitted by brian12321 on Sun, 02/26/2017 - 14:32

I made the top removable by attaching blocks to the inside corners of the apron and using a spade bit to drill a hole.  Then attached hanger bolts to the table top and fastened with washers and wingnuts.

Estimated Cost
600
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax ebony for base. Top is natural with only polyurethane.
Recommended Skill Level
Beginner

Comments

Lunar2

Fri, 04/21/2017 - 13:18

Your tabletop is gorgeous, can't tell anything else because of the shadows.  Thank you for the close-up of your fastener, nicely done