Camp Loft Bed

Submitted by jnfase on Sun, 08/26/2012 - 18:25

A bunkie board needs to be added to the shopping list. I used one from a bunk bed that I used to have as well as some metal slats that I used to support the bunkie board. I would imagine you could use boards as well. Also, I would add that 2" screws would be helpful. There were times when 2 1/2 were too long and 1 1/2 were not long enough. It's a very sturdy bed. Definitely recommend using lots of wood glue for reinforcements. I also added L-shaped brackets under the 2x6's to add support.

Estimated Cost
$100 - $150
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level