Classic Bunk Beds in White

Submitted by Radcrafter on Mon, 03/10/2014 - 16:07

Simple, easy to build and oh-so functional. Loved these plans because of the ease of building and the budget friendly supply list.

The frame for the bunk beds were completed over the course of a weekend and the next week was spent sanding and painting.

The plan allows you to build a strong, sturdy bed that can be easily disassembled/reassembled as necessary. It worked great being able to carry the 4 separate panels into my daughter's small room and then screw everything together. I also liked that feature along with the ladder integrated into the bed.

An Important Tip (one Ana recommends all the time) - Be sure to read the comments section on the original plan. Lots of important information there, especially if you need to buy 8' boards instead of the 10' listed in the plan (like I had to) and a few of the missing cuts are noted in the comments.

You can read more about my build experience here... http://radcrafter.com/2014/03/adding-the-bunk-bed-bedroom-makeover-pt-2/

Built from this plan: Classic Bunk Beds: http://ana-white.com/2010/09/classic-bunk-beds-cleverly-designed.html

Estimated Cost
$100-200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Behr Semi-Gloss in Ultra Pure White (no tint)
Recommended Skill Level
Beginner