Clothesline Frame

Submitted by lphair on Sun, 11/04/2012 - 21:55

I loved the simplicity of this project. I scaled down the original size, to make the 1x3's 33 inches high by 22 inches wide. I also went with my kreg jig set at 1/2" and used 1" screws. I did this because I cracked the first board without even blinking when the kreg jig was set to a depth of 3/4", using 1 1/4" screws.

Estimated Cost
$15
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Minwax Express Finish in Walnut
Recommended Skill Level
Starter Project