Cooler stand

Submitted by Flowerchld on Tue, 08/08/2017 - 16:26

Large cooler stand built for a huge cooler. I wanted to be able to take the cooler out, so it oversized for the cooler, with slats on the bottom to hold the cooler for draining without water sitting on a solid surface inside.

Estimated Cost
$100 plus hardware.
Estimated Time Investment
Day Project (6-9 Hours)
Type of Wood
2x4s,1x6s, 1x2s, 2x2s for support slats holding cooler, hinges, bottle opener,wheels, handle (from plumbing parts)
Finish Used
Poly stain
Recommended Skill Level
Beginner

Free Plans Made Possible By Our Sponsors