Fancy Hall Tree

Submitted by pde00311 on Tue, 06/03/2014 - 08:57

The fancy tree hall fits perfectly across from the coat closet in our entry-way. For the most part, I followed Ana's plans except for the trim and molding. First, instead of using crown molding at the top, I used scrap wood to cut out decorative patterns with my jigsaw. I also cut some decorative crown molding and nailed it to the edges of the bench. Finally, I covered up exposed edges of plywood on the bottom cubbies with cheap molding. I followed the plans to install base molding at the bottom.

Built from Plan(s)
Estimated Cost
$60
Estimated Time Investment
Day Project (6-9 Hours)
Type of Wood
Common Pine and Plywood
Finish Used
Minwax Provincial stain with 3 coats of Polyurethane
Recommended Skill Level
Intermediate