Farmhouse Table

Submitted by Anonymous (not verified) on Tue, 11/15/2016 - 04:21

We used the same farmhouse table plans. We just used 2x6x8 for the top and capped the ends with 2x2s instead of the breadboard. Leaving the boards long gives use optional seating on the ends. From start to finish it took about a day and a half. 

Estimated Cost
Lumber $75
Stain $14
Screws $14
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Kiln dried pine
Finish Used
Varathane Stain plus polyurethane in American walnut
Recommended Skill Level

Free Plans Made Possible By Our Sponsors