Farmhouse Table, Bench, and Extensions

Submitted by lphair on Tue, 02/05/2013 - 00:11

My second farmhouse table, and much easier this time around! Like the first one I built, this one was modified from Tommy's plans (see link below) which was modified from Ana's plans on this site.

Before I put everything together, I used a 1/2" round-over bit on a trim router to round the edges of each piece individually, then sanded each piece individually. After everything was routed and sanded, I joined it all together--it kind of reminds me of Lincoln Logs now!

One other thing I did differently with this table, is I filled in the cracks with a darker wood putty. I love that it has the plank lines without the crevice for crumbs, etc. to fall into.

I finished with Rust-oleum Early American stain and Rust-oleum poly in semi-gloss.

I'm having trouble linking the plans, so again--these are modified from the Farmhouse Table Update Pocket Hole plans on this site, and also from this site:

Estimated Cost
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Finish Used
Rust-oleum Early American and Rust-oleum semi-gloss poly
Recommended Skill Level

Free Plans Made Possible By Our Sponsors