Submitted by Anonymous (not verified) on Sat, 12/17/2016 - 09:44

Super easy project. Was able to have it in my house in 3 days. I used a LED RGB light strip inside to be able to light it up. It came with a remote control which is very handy. I drilled a small hole near the bottom for the IR sensor to stick into. I modified the plans only slightly to be able to make a attachement point for the light strip.

Built from Plan(s)
Estimated Cost
$111.20 if you buy the materials and use them once.
$95.49 if you price out the materials on amounts actually used.
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Common Pine
Finish Used
Gray base paint primer and a topcoat of Linen White Chalked Paint. Sanded to show some of the under gray.
Recommended Skill Level