Submitted by Don Ellery on Wed, 07/19/2017 - 11:25

I made this project for a friend.  It was very important to get straight boards for the back in order to make everything square.  Let me know if you have any questions!

Built from Plan(s)
Estimated Cost
$180
Estimated Time Investment
Day Project (6-9 Hours)
Type of Wood
Sanded Plywood, Select Pine
Finish Used
None yet! I did fill and sand the project and condition the wood for paint. Any exposed pocket holes were filled with angled dowels, some wood filler, and then sanded flat. I used a little extra 1x3 in order to face the middle two dividers. One more note...depending on your board length, you might need to get an extra 1x4. An 8 footer will leave you 1" short for the 41" board. But hey! Leftover wood turns into a new project!
Recommended Skill Level
Intermediate