Hanging Organizer

Submitted by Coopernest on Mon, 09/12/2016 - 07:57

After following Ana for a couple years, I finally got to build something. This was made after watching the you tube video, I used old redwood fencing that was salvaged from a friend headed to the dump. I decided I wanted mine wider so I adjusted the measurements. It went together great, I hung it up before the metal was attached and found it looked funny being so wide. With the pocket hole construction, it was super easy to undo, trim and redo. Then the metal was added and walah! Done! Lovin it. I also made a TP storage hanger to fill the extra space. I will now be making them for 3 friends who have asked for them.

Estimated Cost
$15 is about what I spent for the metal bar and hooks and screws. The wood was reclaimed.
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
sanded to allows the chippy paint to come off, but not all the way. I like the weathered look and sealed with 2 coats of Valspar clear matte sealer spray.
Recommended Skill Level
Starter Project