Large Shark HD4 Extended Bed Workbench

Submitted by Anonymous (not verified) on Thu, 04/06/2017 - 05:21

I started with the sturdy workbench plans ( ) but enlarged it to 38x64x33 to accommodate my new CNC machine.  The plans give you enough enformation so that making a size change it very easy.  I used scrap wood I had and Plywood so the project only cost $85.00 to build.  I didn't have many 2x4's so I used the 2x6's I had instead.  Very sturdy table that took about 4 hours to build.


Janet Fox

Built from Plan(s)
Estimated Cost
85.00 in plywood
Estimated Time Investment
Afternoon Project (3-6 Hours)
Type of Wood
2x6's, 2x4's and 3 sheets of plywood
Finish Used
left raw
Recommended Skill Level

Free Plans Made Possible By Our Sponsors