Making the wife happy

Submitted by egreska on Sat, 08/17/2013 - 09:51

Adapted the original Queen plans to a King with a bed height of 27". Thanks for the original plans. Here are the adapted cuts to match the labeled photo:

Squared2 Headboard – King Size Cutlist for bed height of 27”

 

A - 2” x 2” x 76 ½”               x2

B - 2” x 2” x 61 ½”               x2

C - 2” x 4” x 76 ½”               x1

D - 2” x 2” x 18 ½”               x2

E - 2” x 4” x 18 ½”               x1

F - 1” x 2” x 11 1/16”                      x4

G - 1” x 2” x 19 ½”               x4

H - 1” x 2” x 12 ¼”               x12

I - 1” x 2” x 5 ½”                   x6

J - 1” x 2” x 5 7/8”                x12

K - 1” x 2” x 5 1/8”              x18     K* - (May need to be trimmed to 5”)

 

 

Lumber needed

2” x 2” x 8’                             x4

2” x 4” x 8’                             x1

1” x 2” x 8’                             x5

 

 

 

1” x 2” board cuts

19 ½”

19 ½”

19 ½”

19 ½”

5 1/8”

5 ½”

5 ½”

11 1/16”

11 1/16”

11 1/16”

11 1/16”

12 ¼”

12 ¼”

12 ¼”

12 ¼”

12 ¼”

12 ¼”

12 ¼”

12 ¼”

5 1/8”

5 1/8”

5 7/8”

5 7/8”

5 7/8”

5 7/8”

5 7/8”

5 7/8”

12 ¼”

12 ¼”

12 ¼”

12 ¼”

5 1/8”

5 1/8”

5 7/8”

5 7/8”

5 7/8”

5 7/8”

5 7/8”

5 7/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 1/8”

5 ½”

5 ½”

5 ½”

5 ½”

  

Built from Plan(s)
Estimated Cost
$40.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
pine
Finish Used
Valspar satin finish - "Gray Frost"
Recommended Skill Level
Beginner

Comments

yurra-bazain

Sat, 08/17/2013 - 16:19

Phew, this pattern requires a lot of math, doesn't it? You did an excellent job of customizing the headboard to the size you need!

I'm working (today) on getting measurements right for a Squared2 Dining Table, so seeing your finished product is helpful. =D Thank you!