My Farmhouse X Desk

Submitted by bknjohnson on Sun, 01/16/2022 - 14:03

After nearly two years of working from home I started searching for an actual desk and did not really find what I was looking for. Then I found the Farmhouse X Plans and knew that's what I wanted to do.

I found a birch butcher block top, 27" x 60" on sale for less than the cost of building my own top. I had to carefully adjust the measurements of the plans and also doublechecked before every cut. Measure twice cut once was definitely a good idea for me this time.

I used Z Clips to hold the top to the 2x4 frame and used my biscuit jointer to cut the groove. Took several test cuts to get the right height. I finished the top with Helmsman Spar urethane and five coats of poly. The frame used a primer and some Behr paint (I decided the color "Coffee Bean" was perfect for my long days at the office).

I plan on making slideout drawers soon, with bottom mounted drawer slides. Some baskets would work too.

So far I'm quite happy with how it all came out.

Built from Plan(s)

Comments

Free Plans Made Possible By Our Sponsors