Submitted by Anonymous (not verified) on Sat, 08/20/2016 - 08:05

I did not add the draw and modified the cubbies to hold my computer equipment. I have enough space to add a center draw later and I will probably build a small platform for the monitor. The plywood was salvaged from the floor of my grandmother's house.

Built from Plan(s)
Estimated Cost
About $30 but I already had most of the materials.
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
salvaged plywood and stock pine
Finish Used
2 coats of classic walnut and two coats of oil based polyurethane.
Recommended Skill Level
Beginner