Pine Farmhouse Table

Submitted by jaykruger on Fri, 08/26/2016 - 07:45

Simple pine farmhouse table, top is 2x6 Pine cut down to 5" wide strips top was joined with pocket screws and glue

Base is 4x4 pine joined with lag bolts

Longest part of the buld was sanding the top smooth, special care was needed in measurig the notches to fix the X-Brace legs

 

Tools: Drill, Table Saw, Circular Saw, 1/2 socket drive

Estimated Cost
$150 all in for wood, bolts, screws and stain
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Pine
Finish Used
minwax espresso and poly clear
Recommended Skill Level
Beginner