Potting Bench turned wood storage & deck table

Submitted by kentopolis on Mon, 04/19/2021 - 12:10

Thanks for the design, we modified the bottom cross brace to be 2x4's in order to carry the weight from the wood, and then on the third table removed the bottom of the legs and put casters on the bottom and gave it a shortened (height) top with a 2x4 cross beam capped by a 2x2 (we also didn't overhang the top boards except on the front edge on this table). We are using these for patio serving tables and quick access to some firewood for our fire pit and a chimenea on the other side of the yard.

We will sand and stain eventually as well. They were made out of pressure-treated lumber.

Estimated Cost
$100-120
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Pressure treated
Finish Used
Unfinished.
Recommended Skill Level
Beginner

Comments

Free Plans Made Possible By Our Sponsors