Queen Storage Bed

Submitted by weav3887 on Mon, 09/21/2015 - 07:19

This was a pretty easy build!  I changed the plans a little bit by adding ventalation holes and the way the cubbies conntect.  I wanted to be able to easily take apart the bed if I need to so I built a track system that the middle support sits on and locks in place. 

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Plywood, 1x2, and 1x3
Finish Used
Red Oak
Recommended Skill Level