Rustic x console table

Submitted by Markb25 on Fri, 03/19/2021 - 14:39

Based on the rustic x console plans with a few small changes to cater to the space available.

Built entirely from 2x4 with the exception of the X's which are 2x2; I choose to use half-lap joints to make these, ordinarily I'd have these a lot neater but chose to leave them visable to add the the rustic feel.

For the finish I've oxidised the wood with a steel wool and white vinegar solution and then applied a light grey wash over the top.

Built from Plan(s)
Estimated Cost
50
Estimated Time Investment
Afternoon Project (3-6 Hours)
Type of Wood
Nordic fir
Finish Used
White vinegar and still wool solution, grey wash and rustolium clear wax.
Recommended Skill Level
Beginner

Free Plans Made Possible By Our Sponsors