Scrap wood Buffet table

Submitted by aliabubu72 on Thu, 04/02/2015 - 12:15

Built this 8' x 3' buffet/serving table from scrap wood gathered from work. I bought (2) 2x4's for the legs and the 1" particle board for stability under the slats on top. Finished with Red Mahogany and Polycrylic. It was built as a gift for my church and will now be used for Easter Service for Communion. One of many projects I've made and very happy with how this turned out. 

Estimated Cost
$30 for wood - $17 for paint - $6 for stain - $5 for sandpaper. Total spent - under $60.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I used 6 1x6x12 scrap gathered from work - we get a lot of pallets of product so scrap wood is easy to come by. Used the same scrap wood (ones less desireable for the table top and ripped 1" strips to size for the sides of the top.Secured the legs and table top using a Kreg Jig. Then finished the table using Red Mahogany and Polycrylic (1 coat) for the top and sides - and semi gloss black paint for the table legs and apron.
Recommended Skill Level
Intermediate