Sideboard/Hutch

Submitted by Anonymous (not verified) on Mon, 09/05/2016 - 19:38

Only our second wood working project (after the x console table) and it was a success! Next time, we would do the doors differently as we made them with 1x 3's and 1/4'' plywood and we had to cut the shelves down about 1/4" so they doors would shut flush. Next time we would do the 1/3's as a frame and surface mount the frame then put the 1/4" ply wood on behind it. Absolutely loved how it turned out though!

Built from Plan(s)
Estimated Cost
$400
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Dark Walnut
Recommended Skill Level
Beginner