Slat Bench from Palettes

Submitted by jetpad on Fri, 09/15/2017 - 06:32

This was made from several heavy duty palettes that were used for delivering stone. Because of the wood I could get off the palettes, I switched the thin and thick pieces so that the slat gaps were where the 2x4 pieces were missing instead of the 1x4s. 

Estimated Cost
$10 (for glue and screws)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Type of Wood
Wood from Heavy Duty Palettes
Finish Used
Recommended Skill Level